smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-xp-sp3] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721050SLA360 Serial Number: STF307ME0BB4GK LU WWN Device Id: 5 000cca 347c529ea Firmware Version: ST3OA3AA User Capacity: 500 106 780 160 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Thu Jan 05 22:35:19 2017 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7061) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 118) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 114 3 Spin_Up_Time 0x0007 115 115 024 Pre-fail Always - 367 (Average 367) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2890 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 7 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 34384 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2851 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 2895 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 2895 194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 19/49) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 7 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1 SMART Error Log Version: 1 ATA Error Count: 30 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 30 occurred at disk power-on lifetime: 10629 hours (442 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 13 dc 04 d7 e7 Error: UNC 19 sectors at LBA = 0x07d704dc = 131531996 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 18 d7 04 d7 e0 00 00:03:23.100 READ DMA EXT 25 00 08 c7 04 d7 e0 00 00:03:23.100 READ DMA EXT 25 00 08 91 3b d1 e0 00 00:03:23.100 READ DMA EXT 35 00 08 6f a5 d0 e0 00 00:03:23.100 WRITE DMA EXT 25 00 08 07 1f a8 e0 00 00:03:23.100 READ DMA EXT Error 29 occurred at disk power-on lifetime: 10629 hours (442 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 13 dc 04 d7 e7 Error: UNC 19 sectors at LBA = 0x07d704dc = 131531996 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 20 cf 04 d7 e0 00 00:03:18.600 READ DMA EXT 25 00 08 bf 04 d7 e0 00 00:03:18.600 READ DMA EXT 25 00 0d 0b fc d5 e0 00 00:03:18.600 READ DMA EXT 35 00 03 3f 1a d5 e0 00 00:03:18.600 WRITE DMA EXT 25 00 08 01 d5 d1 e0 00 00:03:18.600 READ DMA EXT Error 28 occurred at disk power-on lifetime: 10629 hours (442 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 13 dc 04 d7 e7 Error: UNC 19 sectors at LBA = 0x07d704dc = 131531996 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 28 c7 04 d7 e0 00 00:03:14.200 READ DMA EXT 25 00 08 b7 04 d7 e0 00 00:03:14.200 READ DMA EXT 25 00 20 eb fb d5 e0 00 00:03:14.200 READ DMA EXT 35 00 08 bf 9f d0 e0 00 00:03:14.200 WRITE DMA EXT 35 00 18 67 9b d0 e0 00 00:03:14.200 WRITE DMA EXT Error 27 occurred at disk power-on lifetime: 10629 hours (442 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 13 dc 04 d7 e7 Error: UNC 19 sectors at LBA = 0x07d704dc = 131531996 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 30 bf 04 d7 e0 00 00:03:09.700 READ DMA EXT 25 00 08 af 04 d7 e0 00 00:03:09.700 READ DMA EXT 35 00 08 c7 0a a5 e0 00 00:03:09.700 WRITE DMA EXT 25 00 08 8f c7 a3 e0 00 00:03:09.700 READ DMA EXT 35 00 80 d7 db c9 e0 00 00:03:09.700 WRITE DMA EXT Error 26 occurred at disk power-on lifetime: 10629 hours (442 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 13 dc 04 d7 e7 Error: UNC 19 sectors at LBA = 0x07d704dc = 131531996 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 38 b7 04 d7 e0 00 00:03:05.300 READ DMA EXT 25 00 08 a7 04 d7 e0 00 00:03:05.300 READ DMA EXT 35 00 08 d7 9f d0 e0 00 00:03:05.300 WRITE DMA EXT 35 00 80 d7 d8 c9 e0 00 00:03:05.300 WRITE DMA EXT 35 00 80 57 d8 c9 e0 00 00:03:05.300 WRITE DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.