smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda LP Device Model: ST3500412AS Serial Number: 6VV1HML6 LU WWN Device Id: 5 000c50 022589f1a Firmware Version: CC32 User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Mar 21 19:18:11 2016 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 633) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 116) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 104 098 006 Pre-fail Always - 6696790 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 090 090 020 Old_age Always - 11064 5 Reallocated_Sector_Ct 0x0033 045 045 036 Pre-fail Always - 2264 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 448774820 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16635 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5536 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 026 026 000 Old_age Always - 74 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 64425492547 189 High_Fly_Writes 0x003a 063 063 000 Old_age Always - 37 190 Airflow_Temperature_Cel 0x0022 063 046 045 Old_age Always - 37 (Min/Max 37/37) 194 Temperature_Celsius 0x0022 037 054 000 Old_age Always - 37 (0 9 0 0 0) 195 Hardware_ECC_Recovered 0x001a 041 025 000 Old_age Always - 6696790 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 14 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 14 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 11407433168372 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2883116860 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 941737722 SMART Error Log Version: 1 ATA Error Count: 72 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 72 occurred at disk power-on lifetime: 16633 hours (693 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 00:08:18.477 READ DMA EXT 35 00 08 ff ff ff ef 00 00:08:18.477 WRITE DMA EXT 25 00 08 ff ff ff ef 00 00:08:18.369 READ DMA EXT 35 00 08 37 cc 01 e0 00 00:08:18.369 WRITE DMA EXT 25 00 40 ff ff ff ef 00 00:08:14.740 READ DMA EXT Error 71 occurred at disk power-on lifetime: 16633 hours (693 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 00:08:14.740 READ DMA EXT 35 00 08 ff ff ff ef 00 00:08:13.125 WRITE DMA EXT 35 00 08 ff ff ff ef 00 00:08:13.125 WRITE DMA EXT 35 00 10 ff ff ff ef 00 00:08:13.124 WRITE DMA EXT 35 00 08 b7 df 5b e0 00 00:08:13.124 WRITE DMA EXT Error 70 occurred at disk power-on lifetime: 16633 hours (693 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 00:03:22.357 READ DMA EXT 25 00 08 ff ff ff ef 00 00:03:22.200 READ DMA EXT 35 00 12 2f 49 51 e0 00 00:03:22.200 WRITE DMA EXT 35 00 80 ff ff ff ef 00 00:03:22.199 WRITE DMA EXT 35 00 08 ff ff ff ef 00 00:03:22.199 WRITE DMA EXT Error 69 occurred at disk power-on lifetime: 16633 hours (693 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 00:03:18.485 READ DMA EXT 35 00 08 ff ff ff ef 00 00:03:18.485 WRITE DMA EXT 35 00 00 4f 33 95 e4 00 00:03:18.484 WRITE DMA EXT 35 00 00 4f 32 95 e4 00 00:03:18.484 WRITE DMA EXT 35 00 00 4f 31 95 e4 00 00:03:18.483 WRITE DMA EXT Error 68 occurred at disk power-on lifetime: 16633 hours (693 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 00:03:14.698 READ DMA EXT 35 00 00 87 74 94 e4 00 00:03:14.698 WRITE DMA EXT 35 00 00 87 73 94 e4 00 00:03:14.697 WRITE DMA EXT 35 00 00 87 72 94 e4 00 00:03:14.696 WRITE DMA EXT 35 00 00 87 71 94 e4 00 00:03:14.696 WRITE DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 16635 297125993 # 2 Short offline Completed: read failure 90% 16635 297125993 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.