smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 7K500 Device Model: Hitachi HTS725050A9A364 Serial Number: 110517PCE400GLHLTNYC LU WWN Device Id: 5 000cca 67fd6a2d0 Firmware Version: PC4OCH0A User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Wed Jan 13 11:58:20 2016 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 070 062 Pre-fail Always - 0 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0023 162 100 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 4558 5 Reallocated_Sector_Ct 0x0033 098 098 005 Pre-fail Always - 330 (0 247) 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 17183 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 4267 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 281470699575243 188 Command_Timeout 0x0032 100 001 000 Old_age Always - 94493284263 190 Airflow_Temperature_Cel 0x0022 061 045 045 Old_age Always In_the_past 39 (Min/Max 24/39) 191 G-Sense_Error_Rate 0x0032 096 096 000 Old_age Always - 1138 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7536755 193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 121192 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 365 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 249 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x002a 100 099 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 459 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 459 occurred at disk power-on lifetime: 16046 hours (668 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e4 8a 93 d9 e3 Error: UNC at LBA = 0x03d9938a = 64590730 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 6f 93 d9 e0 51 00:52:16.000 READ VERIFY SECTOR(S) EXT 42 00 ff 70 92 d9 e0 51 00:52:12.800 READ VERIFY SECTOR(S) EXT 42 00 ff 71 91 d9 e0 51 00:52:04.600 READ VERIFY SECTOR(S) EXT 42 00 ff 72 90 d9 e0 51 00:52:04.500 READ VERIFY SECTOR(S) EXT 42 00 ff 73 8f d9 e0 51 00:52:04.400 READ VERIFY SECTOR(S) EXT Error 458 occurred at disk power-on lifetime: 16046 hours (668 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 ff 70 92 d9 e3 Error: UNC at LBA = 0x03d99270 = 64590448 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 70 92 d9 e0 51 00:52:12.800 READ VERIFY SECTOR(S) EXT 42 00 ff 71 91 d9 e0 51 00:52:04.600 READ VERIFY SECTOR(S) EXT 42 00 ff 72 90 d9 e0 51 00:52:04.500 READ VERIFY SECTOR(S) EXT 42 00 ff 73 8f d9 e0 51 00:52:04.400 READ VERIFY SECTOR(S) EXT 42 00 ff 74 8e d9 e0 51 00:52:04.100 READ VERIFY SECTOR(S) EXT Error 457 occurred at disk power-on lifetime: 16046 hours (668 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 60 92 d9 e3 Error: UNC at LBA = 0x03d99260 = 64590432 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 71 91 d9 e0 51 00:52:04.600 READ VERIFY SECTOR(S) EXT 42 00 ff 72 90 d9 e0 51 00:52:04.500 READ VERIFY SECTOR(S) EXT 42 00 ff 73 8f d9 e0 51 00:52:04.400 READ VERIFY SECTOR(S) EXT 42 00 ff 74 8e d9 e0 51 00:52:04.100 READ VERIFY SECTOR(S) EXT 42 00 ff 75 8d d9 e0 51 00:51:56.000 READ VERIFY SECTOR(S) EXT Error 456 occurred at disk power-on lifetime: 16046 hours (668 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 f2 82 8d d9 e3 Error: UNC at LBA = 0x03d98d82 = 64589186 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 75 8d d9 e0 51 00:51:56.000 READ VERIFY SECTOR(S) EXT 42 00 ff 76 8c d9 e0 51 00:51:52.600 READ VERIFY SECTOR(S) EXT 42 00 ff 77 8b d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT 42 00 ff 78 8a d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT 42 00 ff 79 89 d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT Error 455 occurred at disk power-on lifetime: 16046 hours (668 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 36 3f 8d d9 e3 Error: UNC at LBA = 0x03d98d3f = 64589119 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 76 8c d9 e0 51 00:51:52.600 READ VERIFY SECTOR(S) EXT 42 00 ff 77 8b d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT 42 00 ff 78 8a d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT 42 00 ff 79 89 d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT 42 00 ff 7a 88 d9 e0 51 00:51:49.100 READ VERIFY SECTOR(S) EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.