smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD2500BEVS-22UST0 Serial Number: WD-WXCX07571724 LU WWN Device Id: 5 0014ee 255f78994 Firmware Version: 01.01A01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Sat Jan 31 02:57:18 2015 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 110) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 193 193 051 Pre-fail Always - 22039 3 Spin_Up_Time 0x0003 190 183 021 Pre-fail Always - 1491 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2751 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 5947 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2459 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 562 193 Load_Cycle_Count 0x0032 153 153 000 Old_age Always - 142925 194 Temperature_Celsius 0x0022 097 081 000 Old_age Always - 50 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 186 186 000 Old_age Always - 583 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2170 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2170 occurred at disk power-on lifetime: 5945 hours (247 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c5 dd 53 40 Error: WP at LBA = 0x0053ddc5 = 5496261 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 08 28 c8 ed 5e 00 00 00:12:09.834 WRITE FPDMA QUEUED 61 08 20 1a 7c 6d 00 00 00:12:09.833 WRITE FPDMA QUEUED 61 01 18 19 7c 6d 00 00 00:12:09.833 WRITE FPDMA QUEUED 61 01 10 18 7c 6d 00 00 00:12:09.833 WRITE FPDMA QUEUED 61 08 10 d0 ed 5e 00 00 00:12:09.832 WRITE FPDMA QUEUED Error 2169 occurred at disk power-on lifetime: 5945 hours (247 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c5 dd 53 40 Error: WP at LBA = 0x0053ddc5 = 5496261 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 08 20 c0 ed 5e 00 00 00:12:05.259 WRITE FPDMA QUEUED 61 08 08 c8 ed 5e 00 00 00:12:05.258 WRITE FPDMA QUEUED 60 40 18 a0 db 2e 00 00 00:12:05.258 READ FPDMA QUEUED 60 07 10 c5 dd 53 10 00 00:12:05.258 READ FPDMA QUEUED 61 08 08 38 02 60 00 00 00:12:05.257 WRITE FPDMA QUEUED Error 2168 occurred at disk power-on lifetime: 5945 hours (247 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c5 dd 53 40 Error: UNC at LBA = 0x0053ddc5 = 5496261 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 07 20 c5 dd 53 10 00 00:12:01.104 READ FPDMA QUEUED 60 40 08 60 db 2e 00 00 00:12:01.104 READ FPDMA QUEUED ef 90 03 00 00 00 00 00 00:12:01.104 SET FEATURES [Reserved for Serial ATA] ef 02 00 00 00 00 00 00 00:12:01.104 SET FEATURES [Enable write cache] 61 08 08 d0 ed 5e 00 00 00:11:56.921 WRITE FPDMA QUEUED Error 2167 occurred at disk power-on lifetime: 5945 hours (247 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c5 dd 53 40 Error: WP at LBA = 0x0053ddc5 = 5496261 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 08 08 d0 ed 5e 00 00 00:11:56.921 WRITE FPDMA QUEUED 60 40 38 20 db 2e 00 00 00:11:56.920 READ FPDMA QUEUED 61 01 20 98 f5 6d 00 00 00:11:56.920 WRITE FPDMA QUEUED 61 01 18 48 e6 0f 03 00 00:11:56.919 WRITE FPDMA QUEUED 60 07 10 c5 dd 53 10 00 00:11:56.919 READ FPDMA QUEUED Error 2166 occurred at disk power-on lifetime: 5945 hours (247 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c5 dd 53 40 Error: WP at LBA = 0x0053ddc5 = 5496261 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 08 10 c8 ed 5e 00 00 00:11:52.627 WRITE FPDMA QUEUED 61 08 10 30 02 60 00 00 00:11:52.627 WRITE FPDMA QUEUED 60 07 30 c5 dd 53 10 00 00:11:52.626 READ FPDMA QUEUED 61 08 10 a0 f5 6d 00 00 00:11:52.626 WRITE FPDMA QUEUED 60 40 08 e0 da 2e 00 00 00:11:52.626 READ FPDMA QUEUED SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.