smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-vista-sp2] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3160215AS Serial Number: 9RA52TYV Firmware Version: 4.AAB User Capacity: 160 040 803 840 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Apr 14 20:52:55 2014 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4720 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 187724480 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22653 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4692 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 240 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 059 047 045 Old_age Always - 41 (Min/Max 33/43) 194 Temperature_Celsius 0x0022 041 053 000 Old_age Always - 41 (0 17 0 0 0) 195 Hardware_ECC_Recovered 0x001a 078 066 000 Old_age Always - 216767143 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 1282 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1282 occurred at disk power-on lifetime: 21383 hours (890 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff c7 c5 e0 Error: UNC at LBA = 0x00c5c7ff = 12961791 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 f8 c7 c5 e0 00 00:05:11.228 READ DMA EXT 25 00 08 f0 c7 c5 e0 00 00:05:11.228 READ DMA EXT 25 00 08 e8 c7 c5 e0 00 00:05:11.228 READ DMA EXT 25 00 08 e0 c7 c5 e0 00 00:05:11.229 READ DMA EXT 25 00 08 d8 c7 c5 e0 00 00:05:11.229 READ DMA EXT Error 1281 occurred at disk power-on lifetime: 21383 hours (890 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff c7 c5 e0 Error: UNC at LBA = 0x00c5c7ff = 12961791 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 f8 c7 c5 e0 00 00:08:56.666 READ DMA EXT 25 00 08 f8 c7 c5 e0 00 00:08:56.666 READ DMA EXT 25 00 08 f0 c7 c5 e0 00 00:08:56.666 READ DMA EXT 25 00 08 e8 c7 c5 e0 00 00:08:56.665 READ DMA EXT 25 00 08 e0 c7 c5 e0 00 00:08:59.971 READ DMA EXT Error 1280 occurred at disk power-on lifetime: 21383 hours (890 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff c7 c5 e0 Error: UNC at LBA = 0x00c5c7ff = 12961791 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 f8 c7 c5 e0 00 00:08:56.666 READ DMA EXT 25 00 08 f0 c7 c5 e0 00 00:08:56.666 READ DMA EXT 25 00 08 e8 c7 c5 e0 00 00:08:56.666 READ DMA EXT 25 00 08 e0 c7 c5 e0 00 00:08:56.665 READ DMA EXT 25 00 08 d8 c7 c5 e0 00 00:08:56.665 READ DMA EXT Error 1279 occurred at disk power-on lifetime: 21383 hours (890 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff c7 c5 e0 Error: UNC at LBA = 0x00c5c7ff = 12961791 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 f8 c7 c5 e0 00 00:03:33.555 READ DMA EXT 35 00 08 00 08 5e e0 00 00:03:33.555 WRITE DMA EXT 25 00 08 f8 c7 c5 e0 00 00:03:33.555 READ DMA EXT 25 00 08 f0 c7 c5 e0 00 00:03:33.555 READ DMA EXT 25 00 08 e8 c7 c5 e0 00 00:03:33.555 READ DMA EXT Error 1278 occurred at disk power-on lifetime: 21383 hours (890 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff c7 c5 e0 Error: UNC at LBA = 0x00c5c7ff = 12961791 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 f8 c7 c5 e0 00 00:03:33.555 READ DMA EXT 25 00 08 f0 c7 c5 e0 00 00:03:33.555 READ DMA EXT 25 00 08 e8 c7 c5 e0 00 00:03:33.555 READ DMA EXT 25 00 08 e0 c7 c5 e0 00 00:03:33.555 READ DMA EXT 25 00 08 d8 c7 c5 e0 00 00:03:33.555 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22652 - # 2 Short offline Completed: read failure 90% 21381 46516223 # 3 Short offline Completed without error 00% 19312 - # 4 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.