HWiNFO32 Version 3.96-1640 RP090612 ------------------------------------------------------------------ [Current Computer] Computer Name: RP090612 [Operating System] Operating System: Microsoft Windows 7 Ultimate Build 7601 Service Pack: Service Pack 1 Central Processor(s) ------------------------------------------------------ [CPU Unit Count] Number Of Processor Packages (Physical): 1 Number Of Processors Cores: 1 Number Of Logical Processors: 1 AMD Athlon 64 3700+ ------------------------------------------------------- [General Information] Processor Name: AMD Athlon 64 3700+ Original Processor Frequency: 2400.0 MHz Original Processor Frequency [MHz]: 2400 CPU ID: 00000F4A Extended CPU ID: 00000F4A CPU Brand Name: AMD Athlon(tm) 64 Processor 3700+ CPU Vendor: AuthenticAMD CPU Stepping: SH-CG CPU Code Name: ClawHammer CPU Platform: Socket 754 Number of CPU Cores: 1 Number of Logical CPUs: 1 [Operating Points] CPU HFM (Maximum): 2400.0 MHz = 12.00 x 200.0 MHz @ 1.5500 V CPU Current: 2411.8 MHz = 12.00 x 201.0 MHz @ 1.5000 V CPU Bus Type: Hyper-Transport v1.02 Maximum Supported Hyper-Transport Link Clock: 1000 MHz Current Hyper-Transport Link Clock: 800 MHz [Cache and TLB] L1 Cache: Instruction: 64 KBytes, Data: 64 KBytes L2 Cache: Integrated: 1 MBytes Instruction TLB: Fully associative, 32 entries Data TLB: Fully associative, 32 entries [Standard Feature Flags] FPU on Chip Present Enhanced Virtual-86 Mode Present I/O Breakpoints Present Page Size Extensions Present Time Stamp Counter Present Pentium-style Model Specific Registers Present Physical Address Extension Present Machine Check Exception Present CMPXCHG8B Instruction Present APIC On Chip / PGE (AMD) Present Fast System Call Present Memory Type Range Registers Present Page Global Feature Present Machine Check Architecture Present CMOV Instruction Present Page Attribute Table Present 36-bit Page Size Extensions Present Processor Number Not Present CLFLUSH Instruction Present Debug Trace and EMON Store Not Present Internal ACPI Support Not Present MMX Technology Present Fast FP Save/Restore (IA MMX-2) Present Streaming SIMD Extensions Present Streaming SIMD Extensions 2 Present Self-Snoop Not Present Multi-Threading Capable Not Present Automatic Clock Control Not Present IA-64 Processor Not Present Signal Break on FERR Not Present Streaming SIMD Extensions 3 Not Present PCLMULQDQ Instruction Support Not Present MONITOR/MWAIT Support Not Present Supplemental Streaming SIMD Extensions 3 Not Present FMA Extension Not Present CMPXCHG16B Support Not Present Streaming SIMD Extensions 4.1 Not Present Streaming SIMD Extensions 4.2 Not Present x2APIC Not Present POPCNT Instruction Not Present AES Cryptography Support Not Present XSAVE/XRSTOR/XSETBV/XGETBV Instructions Not Present XGETBV/XSETBV OS Enabled Not Present AVX Support Not Present Half-Precision Convert (CVT16) Not Present [Extended Feature Flags] FPU on Chip Present Enhanced Virtual-86 Mode Present I/O Breakpoints Present Page Size Extensions Present Time Stamp Counter Present AMD-style Model Specific Registers Present Machine Check Exception Present CMPXCHG8B Instruction Present APIC On Chip Present SYSCALL and SYSRET Instructions Present Memory Type Range Registers Present Page Global Feature Present Machine Check Architecture Present CMOV Instruction Present Page Attribute Table Present 36-bit Page Size Extensions Present Multi-Processing / Brand feature Not Present No Execute Present MMX Technology Present MMX+ Extensions Present Fast FP Save/Restore Present Fast FP Save/Restore Optimizations Not Present 1 GB large page support Not Present RDTSCP Instruction Not Present x86-64 Long Mode Present 3DNow! Technology Extensions Present 3DNow! Technology Present LAHF/SAHF Long Mode Support Not Present Core Multi-Processing Legacy Mode Not Present Secure Virtual Machine Not Present Extended APIC Register Space Not Present LOCK MOV CR0 Support Not Present Advanced Bit Manipulation Not Present SSE4A Support Not Present Misaligned SSE Mode Not Present PREFETCH(W) Support Not Present OS Visible Work-around Support Not Present Instruction Based Sampling Not Present XOP Instruction Support Not Present SKINIT, STGI, and DEV Support Not Present Watchdog Timer Support Not Present TBM0 Instruction Support Not Present Lightweight Profiling Support Not Present FMA4 Instruction Support Not Present Translation Cache Extension Not Present NodeId Support Not Present Trailing Bit Manipulation Not Present Topology Extensions Not Present Core Performance Counter Extensions Not Present NB Performance Counter Extensions Not Present [Enhanced Features] Core Performance Boost Not Supported [Memory Ranges] Maximum Physical Address Size: 40-bit (1 TBytes) Maximum Virtual Address Size: 48-bit (256 TBytes) [MTRRs] Range 0-80000000 (0MB-2048MB) Type: Write Back (WB) Motherboard --------------------------------------------------------------- [Computer] Computer Brand Name: Unknown on Noname [Motherboard] Motherboard Model: Motherboard Chipset: nVidia nForce3 250 (Crush K8S2) + CK8S MCP2-S Motherboard Slots: 1xAGP v3.0 USB Version Supported: v2.0 [BIOS] BIOS Manufacturer: American Megatrends BIOS Date: 07/16/07 BIOS Version: P2.40 EFI BIOS: Not Capable Super-IO/LPC Chip: Winbond/Nuvoton W83627(H)F/G-UD-A ACPI Devices -------------------------------------------------------------- Procesor AMD K8 ----------------------------------------------------------- Device Name: Procesor AMD K8 Przycisk ACPI Fixed Feature ----------------------------------------------- Device Name: Przycisk ACPI Fixed Feature Programowalny kontroler przerwań ------------------------------------------ Device Name: Programowalny kontroler przerwań [Assigned Resources] I/O Port: 0020 - 0021 I/O Port: 00A0 - 00A1 [Alternative 1] I/O Port: 0020 - 0021 I/O Port: 00A0 - 00A1 Czasomierz systemowy ------------------------------------------------------ Device Name: Czasomierz systemowy [Assigned Resources] I/O Port: 0040 - 0043 IRQ: 0 [Alternative 1] I/O Port: 0040 - 0043 IRQ: 0 Kontroler DMA ------------------------------------------------------------- Device Name: Kontroler DMA [Assigned Resources] I/O Port: 0000 - 000F I/O Port: 0081 - 0083 I/O Port: 0087 I/O Port: 0089 - 008B I/O Port: 008F I/O Port: 00C0 - 00DF DMA: 4 [Alternative 1] I/O Port: 0000 - 000F I/O Port: 0081 - 0083 I/O Port: 0087 I/O Port: 0089 - 008B I/O Port: 008F I/O Port: 00C0 - 00DF DMA: 4 Port drukarki ECP --------------------------------------------------------- Device Name: Port drukarki ECP [Assigned Resources] I/O Port: 0378 - 037F I/O Port: 0778 - 077F IRQ: 7 DMA: 3 [Alternative 1] I/O Port: 0378 - 037F I/O Port: 0778 - 077F IRQ: 7 DMA: 3 [Alternative 2] I/O Port: 0378 - 037F I/O Port: 0778 - 077F IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 DMA: 0 DMA: 1 DMA: 2 DMA: 3 [Alternative 3] I/O Port: 0278 - 027F I/O Port: 0678 - 067F IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 DMA: 0 DMA: 1 DMA: 2 DMA: 3 [Alternative 4] I/O Port: 03BC - 03BF I/O Port: 07BC - 07BF IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 DMA: 0 DMA: 1 DMA: 2 DMA: 3 Port komunikacyjny -------------------------------------------------------- Device Name: Port komunikacyjny [Assigned Resources] I/O Port: 03F8 - 03FF IRQ: 4 [Alternative 1] I/O Port: 03F8 - 03FF IRQ: 4 [Alternative 2] I/O Port: 03F8 - 03FF IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 [Alternative 3] I/O Port: 02F8 - 02FF IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 [Alternative 4] I/O Port: 03E8 - 03EF IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 [Alternative 5] I/O Port: 02E8 - 02EF IRQ: 3 IRQ: 4 IRQ: 5 IRQ: 6 IRQ: 7 IRQ: 10 IRQ: 11 IRQ: 12 Głośnik systemowy --------------------------------------------------------- Device Name: Głośnik systemowy [Assigned Resources] I/O Port: 0061 [Alternative 1] I/O Port: 0061 Magistrala PCI ------------------------------------------------------------ Device Name: Magistrala PCI [Assigned Resources] I/O Port: 0000 - 0CF7 I/O Port: 0D00 - FFFF Memory Location: 000A0000 - 000BFFFF Memory Location: 000D0000 - 000DFFFF Memory Location: 80000000 - FFFFFFFF [Alternative 1] I/O Port: 0000 - 0CF7 I/O Port: 0D00 - FFFF Memory Location: 000A0000 - 000BFFFF Memory Location: 000D0000 - 000DFFFF Memory Location: 80000000 - FFFFFFFF Zegar systemowy CMOS/czasu rzeczywistego ---------------------------------- Device Name: Zegar systemowy CMOS/czasu rzeczywistego [Assigned Resources] I/O Port: 0070 - 0071 IRQ: 8 [Alternative 1] I/O Port: 0070 - 0071 IRQ: 8 Płyta systemowa ----------------------------------------------------------- Device Name: Płyta systemowa [Assigned Resources] Memory Location: 00000000 - 0009FFFF Memory Location: 000C0000 - 000CFFFF Memory Location: 000E0000 - 000FFFFF Memory Location: 00100000 - 7FFFFFFF [Alternative 1] Memory Location: 00000000 - 0009FFFF Memory Location: 000C0000 - 000CFFFF Memory Location: 000E0000 - 000FFFFF Memory Location: 00100000 - 7FFFFFFF Zasoby płyty głównej ------------------------------------------------------ Device Name: Zasoby płyty głównej [Assigned Resources] Memory Location: FEC00000 - FEC00FFF Memory Location: FEE00000 - FEEFFFFF Memory Location: FF7C0000 - FFFFFFFF [Alternative 1] Memory Location: FEC00000 - FEC00FFF Memory Location: FEE00000 - FEEFFFFF Memory Location: FF7C0000 - FFFFFFFF Zasoby płyty głównej ------------------------------------------------------ Device Name: Zasoby płyty głównej [Assigned Resources] I/O Port: 0010 - 001F I/O Port: 0022 - 003F I/O Port: 0044 - 005F I/O Port: 0062 - 0063 I/O Port: 0065 - 006F I/O Port: 0072 - 007F I/O Port: 0080 I/O Port: 0084 - 0086 I/O Port: 0088 I/O Port: 008C - 008E I/O Port: 0090 - 009F I/O Port: 00A2 - 00BF I/O Port: 00E0 - 00EF I/O Port: 04D0 - 04D1 I/O Port: 4000 - 407F I/O Port: 4080 - 40FF [Alternative 1] I/O Port: 0010 - 001F I/O Port: 0022 - 003F I/O Port: 0044 - 005F I/O Port: 0062 - 0063 I/O Port: 0065 - 006F I/O Port: 0072 - 007F I/O Port: 0080 I/O Port: 0084 - 0086 I/O Port: 0088 I/O Port: 008C - 008E I/O Port: 0090 - 009F I/O Port: 00A2 - 00BF I/O Port: 00E0 - 00EF I/O Port: 04D0 - 04D1 I/O Port: 4000 - 407F I/O Port: 4080 - 40FF Zasoby płyty głównej ------------------------------------------------------ Device Name: Zasoby płyty głównej [Assigned Resources] I/O Port: 0290 - 029F [Alternative 1] I/O Port: 0290 - 029F Procesor numeryczny ------------------------------------------------------- Device Name: Procesor numeryczny [Assigned Resources] I/O Port: 00F0 - 00FF IRQ: 13 [Alternative 1] I/O Port: 00F0 - 00FF IRQ: 13 Przycisk zasilania ACPI --------------------------------------------------- Device Name: Przycisk zasilania ACPI PS/2 Compatible Mouse ----------------------------------------------------- Device Name: PS/2 Compatible Mouse [Assigned Resources] I/O Port: 0060 I/O Port: 0064 IRQ: 12 [Alternative 1] I/O Port: 0060 I/O Port: 0064 IRQ: 12 Kontroler RAID NVIDIA nForce ---------------------------------------------- Device Name: Kontroler RAID NVIDIA nForce [Assigned Resources] I/O Port: 04D2 [Alternative 1] I/O Port: 04D2 SMBIOS DMI ---------------------------------------------------------------- BIOS ---------------------------------------------------------------------- BIOS Vendor: American Megatrends Inc. BIOS Version: P2.40 BIOS Release Date: 07/16/2007 BIOS Start Segment: F000 BIOS Size: 256 KBytes ISA Support: Not Present MCA Support: Not Present EISA Support: Not Present PCI Support: Present PC Card (PCMCIA) Support: Not Present Plug-and-Play Support: Not Present APM Support: Not Present Flash BIOS: Present BIOS Shadow: Present VL-VESA Support: Not Present ESCD Support: Not Present Boot from CD: Present Selectable Boot: Present BIOS ROM Socketed: Present Boot from PC Card: Not Present EDD Support: Present NEC PC-98 Support: Not Present ACPI Support: Present USB Legacy Support: Present AGP Support: Present I2O Boot Support: Not Present LS-120 Boot Support: Present ATAPI ZIP Drive Boot Support: Present IEE1394 Boot Support: Not Present Smart Battery Support: Not Present System -------------------------------------------------------------------- System Manufacturer: Product Name: K8Upgrade-NF3 Product Version: 1.00 Product Serial Number: 00000000 SKU Number: TBD Family: TBD Mainboard ----------------------------------------------------------------- Mainboard Manufacturer: Mainboard Name: K8Upgrade-NF3 Mainboard Version: 1.00 Mainboard Serial Number: 00000000 Asset Tag: 00000000 Location in chassis: TBD Processor ----------------------------------------------------------------- Processor Manufacturer: AMD Processor Version: AMD Athlon(tm) 64 Processor 3700+ External Clock: 200 MHz Maximum Clock Supported: 2400 MHz Current Clock: 2400 MHz CPU Socket: Populated CPU Status: Enabled Processor Type: Central Processor Processor Voltage: 3.3 V, 2.9 V Processor Upgrade: Socket 754 Socket Designation: CPUSocket Memory -------------------------------------------------------------------- [General information] Total Memory Size: 2 GBytes Total Memory Size [MB]: 2048 [Current Performance Settings] Current Memory Clock: 160.8 MHz Current Timing (tCAS-tRCD-tRP-tRAS): 2.5-2-2-5 Memory Runs At: Single-Channel Write to Precharge Delay (tWTP/tWR): 3T RAS# to RAS# Delay (tRRD): 11T Row Cycle Time (tRC): 10T Refresh Cycle Time (tRFC): 12T Row: 0 - 1024 MB PC3200 DDR-SDRAM G Skill ZX ------------------------------ [General Module Information] Module Number: 0 Module Size: 1024 MBytes Memory Type: DDR-SDRAM Error Check/Correction: None Memory Speed: 200.0 MHz (PC3200) Module Manufacturer: G Skill Module Model: ZX Serial Number: N/A Manufacturing Date: Unknown [Module Characteristics] Module Width: 64-bits Module Voltage: SSTL 2.5V SPD Revision: N/A Number Of Rows: 2 Row Address Bits: Bank 1: 13, Bank 2: 13 Column Address Bits: Bank 1: 11, Bank 2: 11 Number Of Banks: 4 [Module timing] Supported Burst Lengths: 2, 4, 8 Refresh Rate: Reduced 0.5x (7.8 us) Min. Back-to-Back Clock Delay: 1 Supported CAS Latencies (tCAS): 2.0 Min. RAS-to-CAS Delay (tRCD): 12.00 ns Min. Row Precharge Time (tRP): 10.00 ns Min. RAS Pulse Width (tRAS): 25 ns Supported Module Timing at 200.0 MHz: 2.0-3-2-5 Min. Row-Activate To Row-Activate Delay (tRRD): 10.00 ns Supported CS Latency: 0 Supported WE Latency: 1 [Features] Buffered Address/Control Inputs: Not Supported Registered Address/Control Inputs: Not Supported On-card PLL For Clock: Not Supported Buffered DQMB Inputs: Not Supported Registered DQMB Inputs: Not Supported Differential Clock Input: Supported Redundant Row Address: Not Supported Row: 1 - 1024 MB PC3200 DDR-SDRAM G Skill ZX ------------------------------ [General Module Information] Module Number: 1 Module Size: 1024 MBytes Memory Type: DDR-SDRAM Error Check/Correction: None Memory Speed: 200.0 MHz (PC3200) Module Manufacturer: G Skill Module Model: ZX Serial Number: N/A Manufacturing Date: Unknown [Module Characteristics] Module Width: 64-bits Module Voltage: SSTL 2.5V SPD Revision: N/A Number Of Rows: 2 Row Address Bits: Bank 1: 13, Bank 2: 13 Column Address Bits: Bank 1: 11, Bank 2: 11 Number Of Banks: 4 [Module timing] Supported Burst Lengths: 2, 4, 8 Refresh Rate: Reduced 0.5x (7.8 us) Min. Back-to-Back Clock Delay: 1 Supported CAS Latencies (tCAS): 2.0 Min. RAS-to-CAS Delay (tRCD): 12.00 ns Min. Row Precharge Time (tRP): 10.00 ns Min. RAS Pulse Width (tRAS): 25 ns Supported Module Timing at 200.0 MHz: 2.0-3-2-5 Min. Row-Activate To Row-Activate Delay (tRRD): 10.00 ns Supported CS Latency: 0 Supported WE Latency: 1 [Features] Buffered Address/Control Inputs: Not Supported Registered Address/Control Inputs: Not Supported On-card PLL For Clock: Not Supported Buffered DQMB Inputs: Not Supported Registered DQMB Inputs: Not Supported Differential Clock Input: Supported Redundant Row Address: Not Supported Bus ----------------------------------------------------------------------- PCI Bus #0 ---------------------------------------------------------------- nVIDIA nForce3 250 (CK8S) - System Controller ----------------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - System Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - System Controller Device Class: Host-to-PCI Bridge Revision ID: A1 Bus Number: 0 Device Number: 0 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E1&SUBSYS_00E11849&REV_A1 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A Memory Base Address 0 F8000000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - LPC Bridge ------------------------------------ [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - LPC Bridge Original Device Name: nVIDIA nForce3 250 (CK8S) - LPC Bridge Device Class: PCI-to-ISA Bridge Revision ID: A2 Bus Number: 0 Device Number: 1 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E0&SUBSYS_00E01849&REV_A2 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - SMBus Controller ------------------------------ [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - SMBus Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - SMBus Controller Device Class: SMBus (System Management Bus) Revision ID: A1 Bus Number: 0 Device Number: 1 Function Number: 1 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E4&SUBSYS_00E41849&REV_A1 [System Resources] Interrupt Line: N/A Interrupt Pin: INTA# I/O Base Address 0 5080 I/O Base Address 4 5000 I/O Base Address 5 5040 [Features] Bus Mastering: Disabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller ----------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller Device Class: Universal Serial Bus (USB) Revision ID: A1 Bus Number: 0 Device Number: 2 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E7&SUBSYS_00E71849&REV_A1 [System Resources] Interrupt Line: IRQ22 Interrupt Pin: INTA# Memory Base Address 0 FF6FF000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller ----------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - OHCI USB 1.1 Controller Device Class: Universal Serial Bus (USB) Revision ID: A1 Bus Number: 0 Device Number: 2 Function Number: 1 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E7&SUBSYS_00E71849&REV_A1 [System Resources] Interrupt Line: IRQ20 Interrupt Pin: INTB# Memory Base Address 0 FF6FE000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - EHCI USB 2.0 Controller ----------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - EHCI USB 2.0 Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - EHCI USB 2.0 Controller Device Class: Universal Serial Bus (USB) Revision ID: A2 Bus Number: 0 Device Number: 2 Function Number: 2 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E8&SUBSYS_00E81849&REV_A2 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTC# Memory Base Address 0 FF6FDC00 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 150 (CK8) - Network Bus Enumerator ------------------------- [General Information] Device Name: nVIDIA nForce3 150 (CK8) - Network Bus Enumerator Original Device Name: nVIDIA nForce3 150 (CK8) - Network Bus Enumerator Device Class: Unknown Bridge Revision ID: A2 Bus Number: 0 Device Number: 5 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00DF&SUBSYS_00DF1849&REV_A2 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTA# Memory Base Address 0 FF6FC000 I/O Base Address 1 EC00 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - Audio Codec Interface ------------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - Audio Codec Interface Original Device Name: nVIDIA nForce3 250 (CK8S) - Audio Codec Interface Device Class: Multimedia Audio Adapter Revision ID: A1 Bus Number: 0 Device Number: 6 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00EA&SUBSYS_08501849&REV_A1 [System Resources] Interrupt Line: IRQ20 Interrupt Pin: INTA# I/O Base Address 0 E800 I/O Base Address 1 E480 Memory Base Address 2 FF6FB000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - Parallel ATA Controller ----------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - Parallel ATA Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - Parallel ATA Controller Device Class: IDE Controller Revision ID: A2 Bus Number: 0 Device Number: 8 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E5&SUBSYS_00E51849&REV_A2 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A I/O Base Address 4 FFA0 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - Serial ATA Controller ------------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - Serial ATA Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - Serial ATA Controller Device Class: IDE Controller Revision ID: A2 Bus Number: 0 Device Number: 10 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00E3&SUBSYS_00E31849&REV_A2 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTA# I/O Base Address 0 F80 I/O Base Address 1 F00 I/O Base Address 2 E80 I/O Base Address 3 E00 I/O Base Address 4 D800 I/O Base Address 5 D400 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - AGP Controller -------------------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - AGP Controller Original Device Name: nVIDIA nForce3 250 (CK8S) - AGP Controller Device Class: PCI-to-PCI Bridge Revision ID: A2 Bus Number: 0 Device Number: 11 Function Number: 0 PCI Latency Timer: 16 Hardware ID: PCI\VEN_10DE&DEV_00E2&SUBSYS_00000000&REV_A2 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Not Capable AGP 8x Bus (PCI Bus #1) --------------------------------------------------- Palit Radeon 9550 --------------------------------------------------------- [General Information] Device Name: Palit Radeon 9550 Original Device Name: ATI/AMD Radeon 9550 (RV350 LX) Device Class: VGA Compatible Adapter Revision ID: 0 Bus Number: 1 Device Number: 0 Function Number: 0 PCI Latency Timer: 255 Hardware ID: PCI\VEN_1002&DEV_4153&SUBSYS_41531FD3&REV_00 [System Resources] Interrupt Line: IRQ18 Interrupt Pin: INTA# Memory Base Address 0 E0000000 I/O Base Address 1 C000 Memory Base Address 2 FF5F0000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable Palit Radeon 9550 - Secondary --------------------------------------------- [General Information] Device Name: Palit Radeon 9550 - Secondary Original Device Name: ATI/AMD Radeon 9550 (RV350) - Secondary Device Class: Unknown Video Adapter Revision ID: 0 Bus Number: 1 Device Number: 0 Function Number: 1 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1002&DEV_4173&SUBSYS_41521FD3&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A Memory Base Address 0 D0000000 Memory Base Address 1 FF5E0000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable nVIDIA nForce3 250 (CK8S) - PCI-to-PCI Bridge ----------------------------- [General Information] Device Name: nVIDIA nForce3 250 (CK8S) - PCI-to-PCI Bridge Original Device Name: nVIDIA nForce3 250 (CK8S) - PCI-to-PCI Bridge Device Class: PCI-to-PCI Bridge Revision ID: A2 Bus Number: 0 Device Number: 14 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_00ED&SUBSYS_00000000&REV_A2 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable PCI Bus #2 ---------------------------------------------------------------- AMD Hammer - HyperTransport Technology Configuration ---------------------- [General Information] Device Name: AMD Hammer - HyperTransport Technology Configuration Original Device Name: AMD Hammer - HyperTransport Technology Configuration Device Class: Host-to-PCI Bridge Revision ID: 0 Bus Number: 0 Device Number: 24 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Disabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Routing Node 0] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 1] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 2] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 3 ] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 4] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 5] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 6] Request Route: This node Response Route: This node Broadcast Route: This node [Routing Node 7] Request Route: This node Response Route: This node Broadcast Route: This node [Node ID] This Node ID: 0 Node Count: 1 HyperTransport I/O Hub Node ID: 0 Lock Controller Node ID: 0 CPU Count: 1 [Unit ID] CPU0 Unit ID: 0 CPU1 Unit ID: 1 Memory Controller Unit ID: 2 Host Bridge Unit ID: 3 HyperTransport I/O Hub Link ID: LDT0 [HyperTransport Transaction Control] Medium priority isochronous writes: Enabled High priority isochronous writes: Enabled Low priority writes: Enabled High priority CPU reads: Disabled High-priority bypass count: 3 Medium-priority bypass count: 3 Downstream non-posted request limit: No limit Sequence ID source node: Disabled APIC extended spurious vector: Writable APIC extended ID: 8 bits APIC extended broadcast ID: FFh Local interrupt conversion: Disabled Coherent HyperTransport configuration space range: Limited Buffer release priority select: 8 packets Change ISOC to Ordered: Isochronous prioritization Response PassPW: Enabled Fill probe: Disabled Remote probe memory cancel: Enabled Probe memory cancel: Enabled CPU Read response PassPW: Disabled CPU request PassPW: Disabled CPU1: Disabled Memory controller target start: Enabled Write doubleword probes: Disabled Write byte probes: Disabled Read doubleword probe: Disabled Read byte probe: Disabled [HyperTransport Initialization Control] Default Link: CPU on same node Request: Enabled Routing Table: Enabled [LDT0 Capability] Drop on Uninitialized Link: No Inbound End-of-Chain Error: No Act As Slave: No Host Hide: Yes Chain Side: 0 Device Number: 0 Double Ended: No [LDT0 Link Control] Doubleword Flow Control Out: Disabled Link Width Out: 16 bits Doubleword Flow Control In: Disabled Link Width In: 16 bits Doubleword Flow Control Out: Not supported Max. Link Width Out: 16 bits Doubleword Flow Control In: Not supported Max. Link Width In: 16 bits Extended Control Time During Initialization: >=16 bit times HyperTransport Stop Tristate: Disabled Isochronous: Disabled CRC Error On Incoming Link (Higher Byte): Not detected CRC Error On Incoming Link (Lower Byte): Not detected Transmitter: On Receiver: On Initialization Complete: Yes Link Failure: Not detected CRC Flood: Disabled [LDT0 Link Frequency Capability] Link 200 MHz Frequency Capability: Capable Link 300 MHz Frequency Capability: Not capable Link 400 MHz Frequency Capability: Capable Link 500 MHz Frequency Capability: Not capable Link 600 MHz Frequency Capability: Capable Link 800 MHz Frequency Capability: Capable Link 1000 MHz Frequency Capability: Capable Link 1200 MHz Frequency Capability: Not capable Link 1400 MHz Frequency Capability: Not capable Link 1600 MHz Frequency Capability: Not capable Link 1800 MHz Frequency Capability: Not capable Link 2000 MHz Frequency Capability: Not capable Link 2200 MHz Frequency Capability: Not capable Link 2400 MHz Frequency Capability: Not capable Link 2600 MHz Frequency Capability: Not capable Link 100 MHz Frequency Capability: Capable Current Link Frequency: 800 MHz Link Major Revision: 1 Link Minor Revision: 2 [LDT0 Feature Capability] Extended Register Set: Not supported Extended CTL: Not required CRC Test Mode: Not supported HyperTransport Stop Mode: Supported Isochronous Flow Control Mode: Not supported [LDT0 Buffer Count] Response Data Buffer Count: 2 Posted Request Data Buffer Count: 5 Request Data Buffer Count: 1 Probe Buffer Count: 0 Response Buffer Count: 4 Posted Request Buffer Count: 5 Request Buffer Count: 6 [LDT0 Bus Number] Subordinate Bus Number: 255 Secondary Bus Number: 0 Primary Bus Number: 0 [LDT0 Type] Link Connect Pending: No UniP-cLDT: Normal coherent/Noncoherent Non Coherent: Noncoherent technology Initialization Complete: Yes Link Connect Status: Connected [LDT1 Capability] Drop on Uninitialized Link: No Inbound End-of-Chain Error: No Act As Slave: No Host Hide: No Chain Side: 0 Device Number: 0 Double Ended: No [LDT1 Link Control] Doubleword Flow Control Out: Disabled Link Width Out: 8 bits Doubleword Flow Control In: Disabled Link Width In: 8 bits Doubleword Flow Control Out: Not supported Max. Link Width Out: 8 bits Doubleword Flow Control In: Not supported Max. Link Width In: 8 bits Extended Control Time During Initialization: >=16 bit times HyperTransport Stop Tristate: Disabled Isochronous: Disabled CRC Error On Incoming Link (Higher Byte): Not detected CRC Error On Incoming Link (Lower Byte): Not detected Transmitter: On Receiver: On Initialization Complete: No Link Failure: Not detected CRC Flood: Disabled [LDT1 Link Frequency Capability] Link 200 MHz Frequency Capability: Not capable Link 300 MHz Frequency Capability: Not capable Link 400 MHz Frequency Capability: Not capable Link 500 MHz Frequency Capability: Not capable Link 600 MHz Frequency Capability: Not capable Link 800 MHz Frequency Capability: Not capable Link 1000 MHz Frequency Capability: Not capable Link 1200 MHz Frequency Capability: Not capable Link 1400 MHz Frequency Capability: Not capable Link 1600 MHz Frequency Capability: Not capable Link 1800 MHz Frequency Capability: Not capable Link 2000 MHz Frequency Capability: Not capable Link 2200 MHz Frequency Capability: Not capable Link 2400 MHz Frequency Capability: Not capable Link 2600 MHz Frequency Capability: Not capable Link 100 MHz Frequency Capability: Not capable Current Link Frequency: 200 MHz Link Major Revision: 0 Link Minor Revision: 0 [LDT1 Feature Capability] Extended Register Set: Not supported Extended CTL: Not required CRC Test Mode: Not supported HyperTransport Stop Mode: Not supported Isochronous Flow Control Mode: Not supported [LDT1 Buffer Count] Response Data Buffer Count: 0 Posted Request Data Buffer Count: 0 Request Data Buffer Count: 0 Probe Buffer Count: 0 Response Buffer Count: 0 Posted Request Buffer Count: 0 Request Buffer Count: 0 [LDT1 Bus Number] Subordinate Bus Number: 0 Secondary Bus Number: 0 Primary Bus Number: 0 [LDT1 Type] Link Connect Pending: No UniP-cLDT: Normal coherent/Noncoherent Non Coherent: Coherent technology Initialization Complete: No Link Connect Status: Not connected [LDT2 Capability] Drop on Uninitialized Link: No Inbound End-of-Chain Error: No Act As Slave: No Host Hide: No Chain Side: 0 Device Number: 0 Double Ended: No [LDT2 Link Control] Doubleword Flow Control Out: Disabled Link Width Out: 8 bits Doubleword Flow Control In: Disabled Link Width In: 8 bits Doubleword Flow Control Out: Not supported Max. Link Width Out: 8 bits Doubleword Flow Control In: Not supported Max. Link Width In: 8 bits Extended Control Time During Initialization: >=16 bit times HyperTransport Stop Tristate: Disabled Isochronous: Disabled CRC Error On Incoming Link (Higher Byte): Not detected CRC Error On Incoming Link (Lower Byte): Not detected Transmitter: On Receiver: On Initialization Complete: No Link Failure: Not detected CRC Flood: Disabled [LDT2 Link Frequency Capability] Link 200 MHz Frequency Capability: Not capable Link 300 MHz Frequency Capability: Not capable Link 400 MHz Frequency Capability: Not capable Link 500 MHz Frequency Capability: Not capable Link 600 MHz Frequency Capability: Not capable Link 800 MHz Frequency Capability: Not capable Link 1000 MHz Frequency Capability: Not capable Link 1200 MHz Frequency Capability: Not capable Link 1400 MHz Frequency Capability: Not capable Link 1600 MHz Frequency Capability: Not capable Link 1800 MHz Frequency Capability: Not capable Link 2000 MHz Frequency Capability: Not capable Link 2200 MHz Frequency Capability: Not capable Link 2400 MHz Frequency Capability: Not capable Link 2600 MHz Frequency Capability: Not capable Link 100 MHz Frequency Capability: Not capable Current Link Frequency: 200 MHz Link Major Revision: 0 Link Minor Revision: 0 [LDT2 Feature Capability] Extended Register Set: Not supported Extended CTL: Not required CRC Test Mode: Not supported HyperTransport Stop Mode: Not supported Isochronous Flow Control Mode: Not supported [LDT2 Buffer Count] Response Data Buffer Count: 0 Posted Request Data Buffer Count: 0 Request Data Buffer Count: 0 Probe Buffer Count: 0 Response Buffer Count: 0 Posted Request Buffer Count: 0 Request Buffer Count: 0 [LDT2 Bus Number] Subordinate Bus Number: 0 Secondary Bus Number: 0 Primary Bus Number: 0 [LDT2 Type] Link Connect Pending: No UniP-cLDT: Normal coherent/Noncoherent Non Coherent: Coherent technology Initialization Complete: No Link Connect Status: Not connected AMD Hammer - Address Map -------------------------------------------------- [General Information] Device Name: AMD Hammer - Address Map Original Device Name: AMD Hammer - Address Map Device Class: Host-to-PCI Bridge Revision ID: 0 Bus Number: 0 Device Number: 24 Function Number: 1 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Disabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [DRAM Base 0] DRAM Base Address: 000 Interleave: None Access: Read/Write [DRAM Limit 0] DRAM Limit Address: 7F000000 Interleave: None Destination Node ID: 0 [DRAM Base 1] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 1] DRAM Limit Address: 000 Interleave: None Destination Node ID: 1 [DRAM Base 2] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 2] DRAM Limit Address: 000 Interleave: None Destination Node ID: 2 [DRAM Base 3] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 3] DRAM Limit Address: 000 Interleave: None Destination Node ID: 3 [DRAM Base 4] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 4] DRAM Limit Address: 000 Interleave: None Destination Node ID: 4 [DRAM Base 5] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 5] DRAM Limit Address: 000 Interleave: None Destination Node ID: 5 [DRAM Base 6] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 6] DRAM Limit Address: 000 Interleave: None Destination Node ID: 6 [DRAM Base 7] DRAM Base Address: 000 Interleave: None Access: No access [DRAM Limit 7] DRAM Limit Address: 000 Interleave: None Destination Node ID: 7 [Memory-Mapped I/O Base 0] Memory-Mapped I/O Base Address: 000 Lock: Unlocked CPU Access: Enabled Access: No access [Memory-Mapped I/O Limit 0] Memory-Mapped I/O Limit Address: 000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 1] Memory-Mapped I/O Base Address: 000 Lock: Unlocked CPU Access: Enabled Access: No access [Memory-Mapped I/O Limit 1] Memory-Mapped I/O Limit Address: 000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 2] Memory-Mapped I/O Base Address: 000 Lock: Unlocked CPU Access: Enabled Access: No access [Memory-Mapped I/O Limit 2] Memory-Mapped I/O Limit Address: 000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 3] Memory-Mapped I/O Base Address: 000 Lock: Unlocked CPU Access: Enabled Access: No access [Memory-Mapped I/O Limit 3] Memory-Mapped I/O Limit Address: 000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 4] Memory-Mapped I/O Base Address: 000 Lock: Unlocked CPU Access: Enabled Access: No access [Memory-Mapped I/O Limit 4] Memory-Mapped I/O Limit Address: 000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 5] Memory-Mapped I/O Base Address: 000 Lock: Unlocked CPU Access: Enabled Access: No access [Memory-Mapped I/O Limit 5] Memory-Mapped I/O Limit Address: 000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 6] Memory-Mapped I/O Base Address: A0000 Lock: Unlocked CPU Access: Enabled Access: Read/Write [Memory-Mapped I/O Limit 6] Memory-Mapped I/O Limit Address: B0000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [Memory-Mapped I/O Base 7] Memory-Mapped I/O Base Address: 80000000 Lock: Unlocked CPU Access: Enabled Access: Read/Write [Memory-Mapped I/O Limit 7] Memory-Mapped I/O Limit Address: FE0B0000 Non-Posted: Posted Destination Link ID: 0 Destination Node ID: 0 [PCI I/O Base 0] PCI I/O Base Address: 1 ISA Enable: Disabled VGA Enable: Enabled Access: Read/Write [PCI I/O Limit 0] PCI I/O Limit Address: FFF Destination Link ID: 0 Destination Node ID: 0 [PCI I/O Base 1] PCI I/O Base Address: 0 ISA Enable: Disabled VGA Enable: Disabled Access: No access [PCI I/O Limit 1] PCI I/O Limit Address: 0 Destination Link ID: 0 Destination Node ID: 0 [PCI I/O Base 2] PCI I/O Base Address: 0 ISA Enable: Disabled VGA Enable: Disabled Access: No access [PCI I/O Limit 2] PCI I/O Limit Address: 0 Destination Link ID: 0 Destination Node ID: 0 [PCI I/O Base 3] PCI I/O Base Address: 0 ISA Enable: Disabled VGA Enable: Disabled Access: No access [PCI I/O Limit 3] PCI I/O Limit Address: 0 Destination Link ID: 0 Destination Node ID: 0 [Config Base and Limit 0] Bus Number Limit: FF Bus Number Base: 0 Destination Link ID: 0 Destination Node ID: 0 Device Number Compare: Disabled Access: Read/Write [Config Base and Limit 1] Bus Number Limit: 0 Bus Number Base: 0 Destination Link ID: 0 Destination Node ID: 0 Device Number Compare: Disabled Access: No access [Config Base and Limit 2] Bus Number Limit: 0 Bus Number Base: 0 Destination Link ID: 0 Destination Node ID: 0 Device Number Compare: Disabled Access: No access [Config Base and Limit 3] Bus Number Limit: 0 Bus Number Base: 0 Destination Link ID: 0 Destination Node ID: 0 Device Number Compare: Disabled Access: No access [DRAM Hole] DRAM Hole Base Address: 0 DRAM Hole Offset: 0 DRAM Hole Enable: Disabled AMD Hammer - DRAM Controller ---------------------------------------------- [General Information] Device Name: AMD Hammer - DRAM Controller Original Device Name: AMD Hammer - DRAM Controller Device Class: Host-to-PCI Bridge Revision ID: 0 Bus Number: 0 Device Number: 24 Function Number: 2 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Disabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [DRAM CS Base Address 0] Base Address: 00 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Enabled [DRAM CS Base Address 1] Base Address: 8000 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Enabled [DRAM CS Base Address 2] Base Address: 10000 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Enabled [DRAM CS Base Address 3] Base Address: 18000 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Enabled [DRAM CS Base Address 4] Base Address: 00 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Disabled [DRAM CS Base Address 5] Base Address: 00 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Disabled [DRAM CS Base Address 6] Base Address: 00 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Disabled [DRAM CS Base Address 7] Base Address: 00 Memory Test: Passed Spare Rank: Not Chip-Select Bank: Disabled [DRAM CS Mask 0] Address Mask: 7E0E6000 [DRAM CS Mask 1] Address Mask: 7E0E6000 [DRAM CS Mask 2] Address Mask: 7E0E6000 [DRAM CS Mask 3] Address Mask: 7E0E6000 [DRAM CS Mask 4 [Sub F]] Address Mask: 00 [DRAM CS Mask 5 [Sub F]] Address Mask: 00 [DRAM CS Mask 6 [Sub F]] Address Mask: 00 [DRAM CS Mask 7 [Sub F]] Address Mask: 00 AMD Hammer - Miscellaneous Control ---------------------------------------- [General Information] Device Name: AMD Hammer - Miscellaneous Control Original Device Name: AMD Hammer - Miscellaneous Control Device Class: Host-to-PCI Bridge Revision ID: 0 Bus Number: 0 Device Number: 24 Function Number: 3 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Disabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [MCA NB Control] DRAM Parity Error Reporting [F]: Disabled Watchdog Timer Error Reporting: Enabled Atomic Read-Modify-Write Error Reporting: Enabled GART Table Walk Error Reporting: Disabled Target Abort Error Reporting: Enabled Master Abort Error Reporting: Enabled HyperTransport Link 2 Sync Packet Error Reporting: Enabled HyperTransport Link 1 Sync Packet Error Reporting: Enabled HyperTransport Link 0 Sync Packet Error Reporting: Enabled HyperTransport Link 2 CRC Error Reporting: Enabled HyperTransport Link 1 CRC Error Reporting: Enabled HyperTransport Link 0 CRC Error Reporting: Enabled Uncorrectable ECC Error Reporting: Enabled Correctable ECC Error Reporting: Enabled [MCA NB Configuration] Sync Flood on DRAM Address Parity Error [F]: Disabled Master Abort CPU Error Response [F]: Enabled Target Abort CPU Error Response [F]: Enabled Northbridge MCA to CPU 0: Disabled PCI Configuration CPU Error Response: Enabled I/O Read Data Error Log: Disabled Chip-Kill ECC Mode: Disabled ECC: Disabled Sync Flood On Any Error: Disabled Sync Flood on Watchdog Timer Error: Enabled HyperTransport Link Select for CRC Error Generation: Link 0 Watchdog Timer Time Base: 1 ms Watchdog Timer Count: 4095 Watchdog Timer: Enabled I/O Error Response: Enabled CPU Error Response: Disabled I/O Master Abort Error Response: Enabled Sync Packet Propagation: Enabled Sync Packet Generation: Enabled Sync Flood on Uncorrectable ECC Error: Disabled CPU Read Data Error Log: Disabled CPU ECC Error Log: Disabled [SRI-to-XBAR Buffer Count] Downstream Posted Request Buffer Count: 1 Downstream Request Buffer Count: 1 Upstream Response Data Buffer Count: 1 Display Refresh Request Buffer Count: 0 Request Data Buffer Count: 0 Upstream Response Buffer Count: 1 Upstream Posted Request Buffer Count: 1 Upstream Request Buffer Count: 1 [XBAR-to-SRI Buffer Count] Downstream Posted Request Buffer Count: 1 Downstream Request Buffer Count: 1 Display Refresh Request Buffer Count: 0 Probe Buffer Count: 8 Upstream Posted Request Buffer Count: 1 Upstream Request Buffer Count: 1 [MCT-to-XBAR Buffer Count] Response Data Buffer Count: 8 Probe Buffer Count: 3 Response Buffer Count: 8 [Free List Buffer Count] SRI to XBAR Free Response Data Buffer Count: 2 SRI to XBAR Free Response Buffer Count: 2 SRI to XBAR Free Request Buffer Count: 1 SRI Free Command Buffer Count: 3 [Power Management Control] Power Management Mode 7 Clock Divisor: 32 Power Management Mode 7 Alternate VID Change: Disabled Power Management Mode 7 FID/VID Change: Disabled Power Management Mode 7 NB Low Power: Disabled Power Management Mode 7 CPU Low Power: Enabled Power Management Mode 6 Clock Divisor: 16 Power Management Mode 6 Alternate VID Change: Disabled Power Management Mode 6 FID/VID Change: Disabled Power Management Mode 6 NB Low Power: Enabled Power Management Mode 6 CPU Low Power: Enabled Power Management Mode 5 Clock Divisor: 32 Power Management Mode 5 Alternate VID Change: Disabled Power Management Mode 5 FID/VID Change: Disabled Power Management Mode 5 NB Low Power: Disabled Power Management Mode 5 CPU Low Power: Enabled Power Management Mode 4 Clock Divisor: 16 Power Management Mode 4 Alternate VID Change: Disabled Power Management Mode 4 FID/VID Change: Disabled Power Management Mode 4 NB Low Power: Enabled Power Management Mode 4 CPU Low Power: Enabled Power Management Mode 3 Clock Divisor: 32 Power Management Mode 3 Alternate VID Change: Disabled Power Management Mode 3 FID/VID Change: Disabled Power Management Mode 3 NB Low Power: Enabled Power Management Mode 3 CPU Low Power: Enabled Power Management Mode 2 Clock Divisor: 8 Power Management Mode 2 Alternate VID Change: Disabled Power Management Mode 2 FID/VID Change: Enabled Power Management Mode 2 NB Low Power: Enabled Power Management Mode 2 CPU Low Power: Enabled Power Management Mode 1 Clock Divisor: 8 Power Management Mode 1 Alternate VID Change: Disabled Power Management Mode 1 FID/VID Change: Disabled Power Management Mode 1 NB Low Power: Disabled Power Management Mode 1 CPU Low Power: Disabled Power Management Mode 0 Clock Divisor: 8 Power Management Mode 0 Alternate VID Change: Disabled Power Management Mode 0 FID/VID Change: Disabled Power Management Mode 0 NB Low Power: Disabled Power Management Mode 0 CPU Low Power: Disabled [GART Aperture Control] GART Table Walk Probes: Enabled GART I/O Accesses: Enabled GART CPU Accesses: Enabled GART Size: 64 MBytes GART: Enabled [GART Aperture Base] GART Aperture Base Address: F8000000 [GART Table Base] GART Table Base Address: 7BFD1000 [Clock Power/Timing] HyperTransport CLK PLL Lock Counter: 13 Link Reconnect Delay: 0 us Clock Ramp Hysteresis: 2000 ns Time to Drive Sleep VID: 0 system clocks Good Phase Error: 400(B)/200(C) system clocks Ramp VID Offset: 0 mV Alternate VID: 0 Voltage Regulator Stabilization Time: 0 ns [HyperTransportt FIFO Read Pointer Optimization] Change Read Pointer For HyperTransport Link 2 Transmitter: RdPtr assigned by hardware Change Read Pointer For HyperTransport Link 2 Receiver: RdPtr assigned by hardware Change Read Pointer For HyperTransport Link 1 Transmitter: RdPtr assigned by hardware Change Read Pointer For HyperTransport Link 1 Receiver: RdPtr assigned by hardware Change Read Pointer For HyperTransport Link 0 Transmitter: RdPtr assigned by hardware Change Read Pointer For HyperTransport Link 0 Receiver: RdPtr assigned by hardware [Thermtrip Status] Case Temperature Specification (TCaseMax) [Rev E]: Not defined Diode Offset Sign [Rev E]: Positive Tj Offset [Rev F]: 0 °C Current Temperature [Rev F]: 45 °C Diode Offset: 18 °C Thermtrip Enabled: Enabled Thermtrip Sense (Core1): Occurs Thermtrip Sense (Core0): Occurs Thermtrip Status: Occurs [Northbridge Capabilities] Multi-Core Capability: Single-Core HTC (Hardware Thermal Control): Not capable On-chip Memory Controller: Capable Maximum DRAM Frequency: No limit Chip-Kill ECC: Not capable ECC: Capable Big MP: Not capable MP: Not capable 128-Bit DRAM: Not capable Video Adapter ------------------------------------------------------------- ATI/AMD Radeon 9550 (RV350 LX) -------------------------------------------- [Video chipset] Video Chipset: ATI/AMD Radeon 9550 (RV350 LX) Video Memory: 128 MBytes of SDRAM [Video Card] Video Card: Palit Radeon 9550 Video Bus: AGP 8X Video BIOS Version: 008.015.033.000 Video Chipset Revision: 12 [Performance] Processor Clock: 249.8 MHz Memory Clock: 195.8 MHz Memory Bus Width: 128-bit Number Of Pixel Pipelines: 4 Hardware ID: PCI\VEN_1002&DEV_4153&SUBSYS_41531FD3&REV_00 Monitor ------------------------------------------------------------------- LG L1715S ----------------------------------------------------------------- [General information] Monitor Name: LG L1715S Monitor Name (Manuf): L1715S Serial Number: 139221 Date Of Manufacture: Week: 2, Year: 2005 Monitor Hardware ID: Monitor\GSM436F Max. Vertical Size: 27 cm Max. Horizontal Size: 34 cm Horizontal Frequency: 30 - 83 kHz Vertical Frequency: 56 - 75 Hz Maximum Pixel Clock: 140 MHz [Advanced parameters] Input Signal: Analog: 0.700 V / 0.000 V (0.700 V p-p) Display Type: RGB color Gamma Factor: 2.20 [DPMS Modes] Standby: Supported Suspend: Supported Active Off: Supported Standard Colour Space: Not Supported Preferred Timing Mode: Supported Default GTF Supported: Not Supported [DPMS Input Signal] Serration VSync: Not Supported Sync On Green: Supported Composite Sync: Supported Separate Syncs: Supported Blank-to-black Setup: Not Supported [Supported Video Modes] 640 x 480 75 Hz 800 x 600 75 Hz 1024 x 768 75 Hz 1280 x 1024 60 Hz 1280 x 1024 338 x 270 mm, Pixel Clock 108.00 MHz Drives -------------------------------------------------------------------- Floppy Drives ------------------------------------------------------------- (S)ATA/ATAPI Drives ------------------------------------------------------- ST3250620A ---------------------------------------------------------------- [General Information] Drive Controller: E-IDE (ATA-7) Drive Channel: Primary, Master Drive Model: Seagate ST3250620A Drive Revision: 3.AAD Drive Serial Number: 5QF0WE3S Drive Capacity: 238,475 MBytes (250 GB) Drive Capacity [MB]: 238475 [Drive Geometry] Number of Cylinders: 16383 Number of Heads: 16 Sectors Per Track: 63 Bytes Per Sector: Unknown Bytes Per Track: Unknown Number Of ECC Bytes: 4 Number of Sectors: 16514064 Total 32-bit LBA Sectors: 268435455 Total 48-bit LBA Sectors: 488397168 Cache Buffer Size: 16384 KBytes Controller Type: Not Specified [Transfer Modes] Sectors Per Interrupt: Total: 16, Active: 16 Max. PIO Transfer Mode: 4 Multiword DMA Mode: Total: 2, Active: - Singleword DMA Mode: Total: -, Active: - Ultra-DMA Mode: Total: 5 (ATA-100), Active: 5 (ATA-100) Max. Multiword DMA Transfer Rate: 16.7 MBytes/s Max. PIO with IORDY Transfer Rate: 8.3 MBytes/s Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s Transfer Width: 16-bit Native Command Queuing: Not Supported TRIM Command: Not Supported [Device flags] Fixed Drive: Present Removable Drive: Not Present Magnetic Storage: Present LBA Mode: Supported DMA Mode: Supported IORDY: Supported IORDY Disableable: Supported [Features] Write Cache: Present, Active S.M.A.R.T. Feature: Present, Active Security Feature: Present, Inactive Removable Media Feature: Not Present, Disabled Power Management: Present, Active Advanced Power Management: Not Present, Inactive Packet Interface: Not Present, Disabled Look-Ahead Buffer: Present, Active Host Protected Area: Present, Enabled Power-Up In Standby: Not Suppported, Inactive Automatic Acoustic Management: Not Suppported, Inactive 48-bit LBA: Supported, Active [Self-Monitoring, Analysis and Reporting Technology] Raw Read Error Rate: 119/6, Worst: 97 (Data = 215654448) Spin Up Time: 95/Always OK, Worst: 95 Start/Stop Count: 97/20, Worst: 97 (Data = 3544) Reallocated Sector Count: 100/36, Worst: 100 Seek Error Rate: 66/30, Worst: 52 (Data = 519468592) Power-On Hours/Cycle Count: 91/Always OK, Worst: 91 (Data = 8138) Spin Retry Count: 100/97, Worst: 100 Power Cycle Count: 92/20, Worst: 92 (Data = 8968) Reported Uncorrectable Errors: 80/Always OK, Worst: 80 (Data = 20) High Fly Writes 100/Always OK, Worst: 100 Airflow Temperature / Exceed Count: 60/45, Worst: 47 (Data = 40.0 °C) Temperature 40/Always OK, Worst: 53 (Data = 40.0 °C) Hardware ECC Recovered: 75/Always OK, Worst: 52 (Data = 242233179) Current Pending Sector Count: 100/Always OK, Worst: 100 (Data = 2) Off-Line Uncorrectable Sector Count: 100/Always OK, Worst: 100 (Data = 2) UltraDMA/SATA CRC Error Rate: 200/Always OK, Worst: 200 (Data = 2) Write/Multi-Zone Error Rate: 100/Always OK, Worst: 253 Data Address Mark Errors 100/Always OK, Worst: 253 HL-DT-ST DVDRAM GSA-H12L -------------------------------------------------- [General information] Drive Model: HL-DT-ST DVDRAM GSA-H12L Drive Revision: VL01 Firmware Date: 2006-09-06 12:34:56 Serial Number: K166AJ85905 Device Type: DVD+R DL [Device capabilities] Drive can read: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL Drive can write: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL HL-DT-ST DVDRAM GSA-4167B ------------------------------------------------- [General information] Drive Model: HL-DT-ST DVDRAM GSA-4167B Drive Revision: DL11 Firmware Date: 2006-09-06 12:34:56 Serial Number: K166AJ85905 Device Type: DVD+R DL [Device capabilities] Drive can read: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL Drive can write: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL Audio --------------------------------------------------------------------- nVIDIA nForce3 250 (CK8S) - Audio Codec Interface ------------------------- Audio Adapter: nVIDIA nForce3 250 (CK8S) - Audio Codec Interface Audio Controller Hardware ID: PCI\VEN_10DE&DEV_00EA&SUBSYS_08501849&REV_A1 AC'97 Codec: Avance Logic/RealTek ALC850 AC'97 Codec ID: 414C4790 [AC'97 Capabilities] Variable Rate Audio: Not Supported Double Rate Audio: Supported SPDIF Output: Supported Variable Rate Microphone ADC: Not Supported Center DAC: Supported Surround DACs: Supported LFE DAC: Supported Dedicated Microphone PCM Channel: Not Supported Modem Functions: Not Supported Bass and Treble Control: Not Supported Simulated Stereo: Not Supported Headphone Output: Not Supported Bass boost: Not Supported Network ------------------------------------------------------------------- Kontroler sieci NVIDIA nForce --------------------------------------------- [General information] Network Card: Kontroler sieci NVIDIA nForce Vendor Description: NVIDIA nForce MCP Networking Adapter Driver MAC Address: 00-13-8F-47-8A-68 [Capabilities] Maximum Link Speed: 100 Mbps Transmit Buffer Size: 3100672 Bytes Receive Buffer Size: 1550336 Bytes Ports --------------------------------------------------------------------- Serial Ports -------------------------------------------------------------- Parallel Ports ------------------------------------------------------------ USB ----------------------------------------------------------------------- Standardowy kontroler OpenHCD hosta USB ----------------------------------- USB Hub ------------------------------------------------------------------- [Port1] : No Device Connected --------------------------------------------- [Port2] : No Device Connected --------------------------------------------- [Port3] : No Device Connected --------------------------------------------- [Port4] : No Device Connected --------------------------------------------- Standardowy kontroler OpenHCD hosta USB ----------------------------------- USB Hub ------------------------------------------------------------------- [Port1] : No Device Connected --------------------------------------------- [Port2] : Urządzenie kompozytowe USB -------------------------------------- Device Manufacturer: Ideazon Product Name: Zboard Gaming Keyboard Serial Number: N/A USB Version Supported: 2.00 Driver Description: Urządzenie kompozytowe USB Hardware ID: USB\VID_1038&PID_0210 [Port3] : No Device Connected --------------------------------------------- [Port4] : No Device Connected --------------------------------------------- Standardowy rozszerzony kontroler hosta PCI do USB ------------------------ USB Hub ------------------------------------------------------------------- [Port1] : Urządzenie kompozytowe USB -------------------------------------- Device Manufacturer: HP Product Name: Deskjet F735 Serial Number: CN8CN3S05505B1 USB Version Supported: 2.00 Driver Description: Urządzenie kompozytowe USB Hardware ID: USB\VID_03F0&PID_2904 [Port2] : Logitech USB Camera (Pro 9000) ---------------------------------- Device Manufacturer: N/A Product Name: N/A Serial Number: A3C6A70E USB Version Supported: 2.00 Driver Description: Logitech USB Camera (Pro 9000) Hardware ID: USB\VID_046D&PID_0990 [Port3] : No Device Connected --------------------------------------------- [Port4] : No Device Connected --------------------------------------------- [Port5] : No Device Connected --------------------------------------------- [Port6] : No Device Connected --------------------------------------------- [Port7] : No Device Connected --------------------------------------------- [Port8] : No Device Connected ---------------------------------------------