HWiNFO32 Version 3.93-1530 KRYS ---------------------------------------------------------------------- [Current Computer] Computer Name: KRYS [Operating System] Operating System: Microsoft Windows XP Professional Build 2600 Service Pack: Dodatek Service Pack 3 Central Processor(s) ------------------------------------------------------ [CPU Unit Count] Number Of Processor Packages (Physical): 1 Number Of Processors Cores: 1 Number Of Logical Processors: 1 AMD Sempron 2500+ --------------------------------------------------------- [General Information] Processor Name: AMD Sempron 2500+ Current Processor Frequency: 1749.4 MHz Current Processor Frequency [MHz]: 1749 CPU ID: 00000681 Extended CPU ID: 00000781 CPU Brand Name: AMD Sempron(tm) 2500+ CPU Vendor: AuthenticAMD CPU Stepping: B0 CPU Code Name: Thoroughbred Number of CPU Cores: 1 Number of Logical CPUs: 1 [Operating Points] CPU Current: 1749.4 MHz = 10.50 x 166.6 MHz CPU Bus Type: FSB (DDR) [Cache and TLB] L1 Cache: Instruction: 64 KBytes, Data: 64 KBytes L2 Cache: Integrated: 256 KBytes Instruction TLB: Fully associative, 16 entries Data TLB: Fully associative, 32 entries [Standard Feature Flags] FPU on Chip Present Enhanced Virtual-86 Mode Present I/O Breakpoints Present Page Size Extensions Present Time Stamp Counter Present Pentium-style Model Specific Registers Present Physical Address Extension Present Machine Check Exception Present CMPXCHG8B Instruction Present APIC On Chip / PGE (AMD) Present Fast System Call Present Memory Type Range Registers Present Page Global Feature Present Machine Check Architecture Present CMOV Instruction Present Page Attribute Table Present 36-bit Page Size Extensions Present Processor Number Not Present CLFLUSH Instruction Not Present Debug Trace and EMON Store Not Present Internal ACPI Support Not Present MMX Technology Present Fast FP Save/Restore (IA MMX-2) Present Streaming SIMD Extensions Present Streaming SIMD Extensions 2 Not Present Self-Snoop Not Present Multi-Threading Capable Not Present Automatic Clock Control Not Present IA-64 Processor Not Present Signal Break on FERR Not Present Streaming SIMD Extensions 3 Not Present PCLMULQDQ Instruction Support Not Present MONITOR/MWAIT Support Not Present Supplemental Streaming SIMD Extensions 3 Not Present FMA Extension Not Present CMPXCHG16B Support Not Present Streaming SIMD Extensions 4.1 Not Present Streaming SIMD Extensions 4.2 Not Present x2APIC Not Present POPCNT Instruction Not Present AES Cryptography Support Not Present XSAVE/XRSTOR/XSETBV/XGETBV Instructions Not Present XGETBV/XSETBV OS Enabled Not Present AVX Support Not Present Half-Precision Convert (CVT16) Not Present [Extended Feature Flags] FPU on Chip Present Enhanced Virtual-86 Mode Present I/O Breakpoints Present Page Size Extensions Present Time Stamp Counter Present AMD-style Model Specific Registers Present Machine Check Exception Present CMPXCHG8B Instruction Present APIC On Chip Present SYSCALL and SYSRET Instructions Present Memory Type Range Registers Present Page Global Feature Present Machine Check Architecture Present CMOV Instruction Present Page Attribute Table Present 36-bit Page Size Extensions Present Multi-Processing / Brand feature Present No Execute Not Present MMX Technology Present MMX+ Extensions Present Fast FP Save/Restore Present Fast FP Save/Restore Optimizations Not Present 1 GB large page support Not Present RDTSCP Instruction Not Present x86-64 Long Mode Not Present 3DNow! Technology Extensions Present 3DNow! Technology Present LAHF/SAHF Long Mode Support Not Present Core Multi-Processing Legacy Mode Not Present Secure Virtual Machine Not Present Extended APIC Register Space Not Present LOCK MOV CR0 Support Not Present Advanced Bit Manipulation Not Present SSE4A Support Not Present Misaligned SSE Mode Not Present PREFETCH(W) Support Not Present OS Visible Work-around Support Not Present Instruction Based Sampling Not Present XOP Instruction Support Not Present SKINIT, STGI, and DEV Support Not Present Watchdog Timer Support Not Present TBM0 Instruction Support Not Present Lightweight Profiling Support Not Present FMA4 Instruction Support Not Present Translation Cache Extension Not Present NodeId Support Not Present Trailing Bit Manipulation Not Present Topology Extensions Not Present Core Performance Counter Extensions Not Present NB Performance Counter Extensions Not Present [Enhanced Features] Core Performance Boost Not Supported [Memory Ranges] Maximum Physical Address Size: 34-bit (16 GBytes) Maximum Virtual Address Size: 32-bit (4 GBytes) [MTRRs] Range 0-20000000 (0MB-512MB) Type: Write Back (WB) Range 20000000-30000000 (512MB-768MB) Type: Write Back (WB) Motherboard --------------------------------------------------------------- [Computer] Computer Brand Name: Unknown on Noname [Motherboard] Motherboard Model: Motherboard Chipset: VIA KT600 + VT8233CF/VT8235 Motherboard Slots: 5xPCI, 1xAGP v3.5 USB Version Supported: v2.0 [BIOS] BIOS Manufacturer: American Megatrends BIOS Date: 07/19/04 BIOS Version: P1.30 EFI BIOS: Not Capable Super-IO/LPC Chip: Winbond/Nuvoton W83697HF Plug-and-Play System Nodes ------------------------------------------------ PCI Bus ------------------------------------------------------------------- [General Information] Node Number: 0 Device ID: PNP0A03 Device Name: PCI Bus Device Type Code: 060400 [System Resources] I/O Port: 04D0 I/O Port: 0CF8 I/O Port: 0022 I/O Port: 0072 I/O Port: 0400 I/O Port: 0800 I/O Port: 0880 I/O Port: 002E I/O Port: 002F [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported System Board Extension ---------------------------------------------------- [General Information] Node Number: 1 Device ID: PNP0C01 Device Name: System Board Extension Device Type Code: 050000 [System Resources] Memory Location: 00000000-0009FBFF Memory Location: 0009FC00-0009FFFF Memory Location: 000F0000-000FFFFF Memory Location: 00100000-2FFEFFFF Memory Location: 2FFF0000-2FFF7FFF Memory Location: 2FFF8000-2FFFFFFF Memory Location: FEC00000-FEC00FFF Memory Location: FEE00000-FEE00FFF Memory Location: FFF80000-FFFFFFFF [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported Programmable Interrupt Controller ----------------------------------------- [General Information] Node Number: 2 Device ID: PNP0000 Device Name: Programmable Interrupt Controller Device Type Code: 080001 [System Resources] IRQ: 2 I/O Port: 0020-0021 I/O Port: 00A0-00A1 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported DMA Controller ------------------------------------------------------------ [General Information] Node Number: 3 Device ID: PNP0200 Device Name: DMA Controller Device Type Code: 080101 [System Resources] DMA: 4 I/O Port: 0000-000F I/O Port: 0080-0090 I/O Port: 0094-009F I/O Port: 00C0-00DE [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported System Timer -------------------------------------------------------------- [General Information] Node Number: 4 Device ID: PNP0100 Device Name: System Timer Device Type Code: 080201 [System Resources] IRQ: 0 I/O Port: 0040-0043 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported RealTime Clock ------------------------------------------------------------ [General Information] Node Number: 5 Device ID: PNP0B00 Device Name: RealTime Clock Device Type Code: 080301 [System Resources] IRQ: 8 I/O Port: 0070-0071 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported 101/102-Key or MS Natural Keyboard ---------------------------------------- [General Information] Node Number: 6 Device ID: PNP0303 Device Name: 101/102-Key or MS Natural Keyboard Device Type Code: 090000 [System Resources] IRQ: 1 I/O Port: 0060 I/O Port: 0064 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Supported Disableable Device: Not Supported PC Speaker ---------------------------------------------------------------- [General Information] Node Number: 7 Device ID: PNP0800 Device Name: PC Speaker Device Type Code: 088000 [System Resources] I/O Port: 0061 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported Numeric Data Processor ---------------------------------------------------- [General Information] Node Number: 8 Device ID: PNP0C04 Device Name: Numeric Data Processor Device Type Code: 088000 [System Resources] IRQ: 13 I/O Port: 00F0-00FF [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Not Supported Disableable Device: Not Supported 16550A-compatible UART Serial Port ---------------------------------------- [General Information] Node Number: 9 Device ID: PNP0501 Device Name: 16550A-compatible UART Serial Port Device Type Code: 070000 [System Resources] IRQ: 4 I/O Port: 03F8 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Supported Disableable Device: Supported ECP Parallel Port --------------------------------------------------------- [General Information] Node Number: 10 Device ID: PNP0401 Device Name: ECP Parallel Port Device Type Code: 070100 [System Resources] IRQ: 7 DMA: 0 I/O Port: 0378 I/O Port: 0000 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Supported Disableable Device: Supported Gameport Joystick --------------------------------------------------------- [General Information] Node Number: 11 Device ID: PNPB02F Device Name: Gameport Joystick Device Type Code: 098000 [System Resources] I/O Port: 0200 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Supported Disableable Device: Supported Floppy Controller --------------------------------------------------------- [General Information] Node Number: 12 Device ID: PNP0700 Device Name: Floppy Controller Device Type Code: 010200 [System Resources] IRQ: 6 DMA: 2 I/O Port: 03F0 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Supported Disableable Device: Supported Logitech PS/2 Port Mouse -------------------------------------------------- [General Information] Node Number: 13 Device ID: PNP0F13 Device Name: Logitech PS/2 Port Mouse Device Type Code: 090200 [System Resources] IRQ: 12 [Flags] Removable Device: Not Present Docking: Not Supported IPL: Not Supported Primary Input Device: Not Capable Primary Output Device: Not Capable Configurable Device: Supported Disableable Device: Supported ACPI Devices -------------------------------------------------------------- Procesor AMD K7 ----------------------------------------------------------- Device Name: Procesor AMD K7 Przycisk ACPI Fixed Feature ----------------------------------------------- Device Name: Przycisk ACPI Fixed Feature Programowalny kontroler przerwań ------------------------------------------ Device Name: Programowalny kontroler przerwań [Assigned Resources] I/O Port: 0020 - 0021 I/O Port: 00A0 - 00A1 [Alternative 1] I/O Port: 0020 - 0021 I/O Port: 00A0 - 00A1 Czasomierz systemowy ------------------------------------------------------ Device Name: Czasomierz systemowy [Assigned Resources] I/O Port: 0040 - 0043 IRQ: 0 [Alternative 1] I/O Port: 0040 - 0043 IRQ: 0 Kontroler DMA ------------------------------------------------------------- Device Name: Kontroler DMA [Assigned Resources] I/O Port: 0000 - 000F I/O Port: 0081 - 0083 I/O Port: 0087 I/O Port: 0089 - 008B I/O Port: 008F I/O Port: 00C0 - 00DF DMA: 4 [Alternative 1] I/O Port: 0000 - 000F I/O Port: 0081 - 0083 I/O Port: 0087 I/O Port: 0089 - 008B I/O Port: 008F I/O Port: 00C0 - 00DF DMA: 4 Standardowa klawiatura 101/102 klawisze lub Microsoft Natural Keyboard PS/2 Device Name: Standardowa klawiatura 101/102 klawisze lub Microsoft Natural Keyboard PS/2 [Assigned Resources] I/O Port: 0060 I/O Port: 0064 IRQ: 1 [Alternative 1] I/O Port: 0060 I/O Port: 0064 IRQ: 1 Port drukarki ECP --------------------------------------------------------- Device Name: Port drukarki ECP [Assigned Resources] I/O Port: 0378 - 037F I/O Port: 0778 - 077B IRQ: 7 DMA: 0 [Alternative 1] I/O Port: 0378 - 037F I/O Port: 0778 - 077B IRQ: 7 DMA: 1 [Alternative 2] I/O Port: 0378 - 037F I/O Port: 0778 - 077B IRQ: 5 IRQ: 7 DMA: 0 DMA: 1 DMA: 3 [Alternative 3] I/O Port: 0278 - 027F I/O Port: 0678 - 067B IRQ: 5 IRQ: 7 DMA: 0 DMA: 1 DMA: 3 [Alternative 4] I/O Port: 03BC - 03BF I/O Port: 07BC - 07BF IRQ: 5 IRQ: 7 DMA: 0 DMA: 1 DMA: 3 [Alternative 5] I/O Port: 0378 - 037F I/O Port: 0778 - 077B IRQ: 5 IRQ: 7 [Alternative 6] I/O Port: 0278 - 027F I/O Port: 0678 - 067B IRQ: 5 IRQ: 7 [Alternative 7] I/O Port: 03BC - 03BF I/O Port: 07BC - 07BF IRQ: 5 IRQ: 7 Port komunikacyjny -------------------------------------------------------- Device Name: Port komunikacyjny [Assigned Resources] I/O Port: 03F8 - 03FF IRQ: 4 [Alternative 1] I/O Port: 03F8 - 03FF IRQ: 4 [Alternative 2] I/O Port: 03F8 - 03FF IRQ: 3 IRQ: 4 IRQ: 10 IRQ: 11 [Alternative 3] I/O Port: 02F8 - 02FF IRQ: 3 IRQ: 4 IRQ: 10 IRQ: 11 [Alternative 4] I/O Port: 03E8 - 03EF IRQ: 3 IRQ: 4 IRQ: 10 IRQ: 11 [Alternative 5] I/O Port: 02E8 - 02EF IRQ: 3 IRQ: 4 IRQ: 10 IRQ: 11 Standardowy kontroler stacji dyskietek ------------------------------------ Device Name: Standardowy kontroler stacji dyskietek [Assigned Resources] I/O Port: 03F2 - 03F3 I/O Port: 03F4 - 03F5 I/O Port: 03F7 IRQ: 6 DMA: 2 [Alternative 1] I/O Port: 03F2 - 03F3 I/O Port: 03F4 - 03F5 I/O Port: 03F7 IRQ: 6 DMA: 2 Głośnik systemowy --------------------------------------------------------- Device Name: Głośnik systemowy [Assigned Resources] I/O Port: 0061 [Alternative 1] I/O Port: 0061 Magistrala PCI ------------------------------------------------------------ Device Name: Magistrala PCI [Assigned Resources] I/O Port: 0000 - 0CF7 I/O Port: 0D00 - FFFF Memory Location: 000A0000 - 000BFFFF Memory Location: 000C0000 - 000DFFFF Memory Location: 30000000 - FFDFFFFF Memory Location: FEE01000 - FFDFFFFF [Alternative 1] I/O Port: 0000 - 0CF7 I/O Port: 0D00 - FFFF Memory Location: 000A0000 - 000BFFFF Memory Location: 000C0000 - 000DFFFF Memory Location: 30000000 - FFDFFFFF Memory Location: FEE01000 - FFDFFFFF Zegar systemowy CMOS/czasu rzeczywistego ---------------------------------- Device Name: Zegar systemowy CMOS/czasu rzeczywistego [Assigned Resources] I/O Port: 0070 - 0071 IRQ: 8 [Alternative 1] I/O Port: 0070 - 0071 IRQ: 8 Zasoby płyty głównej ------------------------------------------------------ Device Name: Zasoby płyty głównej [Assigned Resources] I/O Port: 0010 - 001F I/O Port: 0022 - 003F I/O Port: 0044 - 005F I/O Port: 0062 - 0063 I/O Port: 0065 - 006F I/O Port: 0072 - 007F I/O Port: 0080 I/O Port: 0084 - 0086 I/O Port: 0088 I/O Port: 008C - 008E I/O Port: 0090 - 009F I/O Port: 00A2 - 00BF I/O Port: 00E0 - 00EF I/O Port: 0295 - 0296 I/O Port: 03F0 - 03F1 I/O Port: 04D0 - 04D1 I/O Port: 0400 - 040F I/O Port: 0800 - 087F Memory Location: FEC00000 - FEC00FFF Memory Location: FEE00000 - FEE00FFF [Alternative 1] I/O Port: 0010 - 001F I/O Port: 0022 - 003F I/O Port: 0044 - 005F I/O Port: 0062 - 0063 I/O Port: 0065 - 006F I/O Port: 0072 - 007F I/O Port: 0080 I/O Port: 0084 - 0086 I/O Port: 0088 I/O Port: 008C - 008E I/O Port: 0090 - 009F I/O Port: 00A2 - 00BF I/O Port: 00E0 - 00EF I/O Port: 0295 - 0296 I/O Port: 03F0 - 03F1 I/O Port: 04D0 - 04D1 I/O Port: 0400 - 040F I/O Port: 0800 - 087F Memory Location: FEC00000 - FEC00FFF Memory Location: FEE00000 - FEE00FFF Procesor numeryczny ------------------------------------------------------- Device Name: Procesor numeryczny [Assigned Resources] I/O Port: 00F0 - 00FF IRQ: 13 [Alternative 1] I/O Port: 00F0 - 00FF IRQ: 13 Przycisk zasilania ACPI --------------------------------------------------- Device Name: Przycisk zasilania ACPI Przycisk uśpienia ACPI ---------------------------------------------------- Device Name: Przycisk uśpienia ACPI Mysz zgodna z PS/2 -------------------------------------------------------- Device Name: Mysz zgodna z PS/2 [Assigned Resources] IRQ: 12 [Alternative 1] IRQ: 12 Standardowy port gier ----------------------------------------------------- Device Name: Standardowy port gier [Assigned Resources] I/O Port: 0200 - 0207 [Alternative 1] I/O Port: 0200 - 0207 [Alternative 2] I/O Port: 0208 - 020F SMBIOS DMI ---------------------------------------------------------------- BIOS ---------------------------------------------------------------------- BIOS Vendor: American Megatrends Inc. BIOS Version: P1.30 BIOS Release Date: 07/19/2004 BIOS Start Segment: F000 BIOS Size: 256 KBytes ISA Support: Present MCA Support: Not Present EISA Support: Not Present PCI Support: Present PC Card (PCMCIA) Support: Not Present Plug-and-Play Support: Present APM Support: Present Flash BIOS: Present BIOS Shadow: Present VL-VESA Support: Not Present ESCD Support: Present Boot from CD: Present Selectable Boot: Present BIOS ROM Socketed: Present Boot from PC Card: Not Present EDD Support: Present NEC PC-98 Support: Not Present ACPI Support: Present USB Legacy Support: Present AGP Support: Present I2O Boot Support: Not Present LS-120 Boot Support: Present ATAPI ZIP Drive Boot Support: Present IEE1394 Boot Support: Not Present Smart Battery Support: Not Present System -------------------------------------------------------------------- System Manufacturer: Product Name: K7VT4A+ Product Version: 1.0x Product Serial Number: 00000000 Mainboard ----------------------------------------------------------------- Mainboard Manufacturer: Mainboard Name: K7VT4A+ Mainboard Version: 1.0x Mainboard Serial Number: 00000000 System Enclosure ---------------------------------------------------------- Manufacturer: Case Type: Desktop Version: X.XX Serial Number: 00000000 Asset Tag Number: 00000000 Processor ----------------------------------------------------------------- Processor Manufacturer: AMD Processor Version: AMD Sempron(tm) 2500+ External Clock: 166 MHz Maximum Clock Supported: 3000 MHz Current Clock: 1750 MHz CPU Socket: Populated CPU Status: Enabled Processor Type: Central Processor Processor Voltage: 3.3 V, 2.9 V Processor Upgrade: Socket A Socket Designation: Socket-A Internal Cache ------------------------------------------------------------ Socket Designation: Internal Cache Cache State: Enabled Cache Type: Internal, Unified Cache Scheme: Write-Back Supported SRAM Type: Synchronous Current SRAM Type: Synchronous Cache Speed: Unknown Error Correction Type: Unknown Maximum Cache Size: 1024 KBytes Installed Cache Size: 128 KBytes Cache Associativity: 4-way Set-Associative Internal Cache ------------------------------------------------------------ Socket Designation: Internal Cache Cache State: Enabled Cache Type: Internal, Unified Cache Scheme: Write-Back Supported SRAM Type: Synchronous Current SRAM Type: Synchronous Cache Speed: Unknown Error Correction Type: Maximum Cache Size: 1024 KBytes Installed Cache Size: 256 KBytes Cache Associativity: 4-way Set-Associative Memory Devices ------------------------------------------------------------ Memory Controller --------------------------------------------------------- Error Detecting Method: 32-bit ECC Error Correction: Single-Bit Supported Interleave: 1-Way Current Interleave: 1-Way Max. Memory Module Size: 1024 MBytes Supported Memory Speed: Supported Memory Type: Parity, ECC, DIMM, SDRAM Supported Memory Voltage: 3.3 V Associated Memory Slots: 2 DIMM1 --------------------------------------------------------------------- Socket Designation: DIMM1 Memory Type: FPM, DIMM Memory Speed: Unknown Installed size: 256 MBytes Enabled size: 256 MBytes DIMM2 --------------------------------------------------------------------- Socket Designation: DIMM2 Memory Type: FPM, DIMM Memory Speed: Unknown Installed size: 512 MBytes Enabled size: 512 MBytes System Slots -------------------------------------------------------------- PCI1 ---------------------------------------------------------------------- Slot Designation: PCI1 Slot Type: PCI Slot Usage: Empty Slot Data Bus Width: 32-bit Slot Length: Long PCI2 ---------------------------------------------------------------------- Slot Designation: PCI2 Slot Type: PCI Slot Usage: Empty Slot Data Bus Width: 32-bit Slot Length: Long PCI3 ---------------------------------------------------------------------- Slot Designation: PCI3 Slot Type: PCI Slot Usage: Empty Slot Data Bus Width: 32-bit Slot Length: Long PCI4 ---------------------------------------------------------------------- Slot Designation: PCI4 Slot Type: PCI Slot Usage: Empty Slot Data Bus Width: 32-bit Slot Length: Long PCI5 ---------------------------------------------------------------------- Slot Designation: PCI5 Slot Type: PCI Slot Usage: Empty Slot Data Bus Width: 32-bit Slot Length: Long Port Connectors ----------------------------------------------------------- Keyboard Port ------------------------------------------------------------- Port Type: Keyboard Port Internal Reference: PS2 KEYBOARD Internal Connector Type: None External Reference: PS2 Keyboard External Connector Type: PS/2 Mouse Port ---------------------------------------------------------------- Port Type: Mouse Port Internal Reference: PS2 MOUSE Internal Connector Type: None External Reference: PS2 Mouse External Connector Type: PS/2 Serial Port 16550A Compatible --------------------------------------------- Port Type: Serial Port 16550A Compatible Internal Reference: COM Internal Connector Type: None External Reference: COM Port External Connector Type: DB-9 pin male Parallel Port ECP/EPP ----------------------------------------------------- Port Type: Parallel Port ECP/EPP Internal Reference: LPT Internal Connector Type: None External Reference: LPT Port External Connector Type: DB25 pin female USB ----------------------------------------------------------------------- Port Type: USB Internal Reference: USB Internal Connector Type: None External Reference: Rear USB 0 External Connector Type: Access Bus (USB) USB ----------------------------------------------------------------------- Port Type: USB Internal Reference: USB Internal Connector Type: None External Reference: Rear USB 1 External Connector Type: Access Bus (USB) USB ----------------------------------------------------------------------- Port Type: USB Internal Reference: USB Internal Connector Type: None External Reference: Front USB 2 External Connector Type: Access Bus (USB) USB ----------------------------------------------------------------------- Port Type: USB Internal Reference: USB Internal Connector Type: None External Reference: Front USB 3 External Connector Type: Access Bus (USB) Network Port -------------------------------------------------------------- Port Type: Network Port Internal Reference: ETHERNET Internal Connector Type: None External Reference: ETHERNET External Connector Type: RJ-45 Audio Port ---------------------------------------------------------------- Port Type: Audio Port Internal Reference: LINE-OUT Internal Connector Type: None External Reference: LINE-OUT External Connector Type: Mini-jack (headphones) Audio Port ---------------------------------------------------------------- Port Type: Audio Port Internal Reference: LINE-IN Internal Connector Type: None External Reference: LINE-IN External Connector Type: Mini-jack (headphones) Audio Port ---------------------------------------------------------------- Port Type: Audio Port Internal Reference: MICROPHONE Internal Connector Type: None External Reference: MICROPHONE External Connector Type: Mini-jack (headphones) MIDI Port ----------------------------------------------------------------- Port Type: MIDI Port Internal Reference: GAME Internal Connector Type: None External Reference: Game Port External Connector Type: DB-15 pin female BIOS Language ------------------------------------------------------------- Memory -------------------------------------------------------------------- [General information] Total Memory Size: 768 MBytes Total Memory Size [MB]: 768 [Current Performance Settings] Current Memory Clock: 166.6 MHz (1 : 1 ratio) Current Timing (tCAS-tRCD-tRP-tRAS): 2.5-4-4-7 Memory Runs At: Single-Channel Command Rate: 2T Row: 0 - 256 MB PC3200 DDR-SDRAM AL5D8B53T-5B1K ----------------------- [General Module Information] Module Number: 0 Module Size: 256 MBytes Memory Type: DDR-SDRAM Error Check/Correction: None Memory Speed: 200.0 MHz (PC3200) Module Manufacturer: Unknown Module Model: AL5D8B53T-5B1K Serial Number: N/A Manufacturing Date: Unknown [Module Characteristics] Module Width: 64-bits Module Voltage: SSTL 2.5V SPD Revision: N/A Number Of Rows: 1 Row Address Bits: 13 Column Address Bits: 10 Number Of Banks: 4 [Module timing] Supported Burst Lengths: 2, 4, 8 Refresh Rate: Reduced 0.5x (7.8 us) Min. Back-to-Back Clock Delay: 1 Supported CAS Latencies (tCAS): 2.5 Min. RAS-to-CAS Delay (tRCD): 15.00 ns Min. Row Precharge Time (tRP): 15.00 ns Min. RAS Pulse Width (tRAS): 40 ns Supported Module Timing at 200.0 MHz: 2.5-3-3-8 Min. Row-Activate To Row-Activate Delay (tRRD): 10.00 ns Supported CS Latency: 0 Supported WE Latency: 1 [Features] Buffered Address/Control Inputs: Not Supported Registered Address/Control Inputs: Not Supported On-card PLL For Clock: Not Supported Buffered DQMB Inputs: Not Supported Registered DQMB Inputs: Not Supported Differential Clock Input: Supported Redundant Row Address: Not Supported Row: 1 - 512 MB PC3200 DDR-SDRAM A-DATA Technology ----------------------- [General Module Information] Module Number: 1 Module Size: 512 MBytes Memory Type: DDR-SDRAM Error Check/Correction: None Memory Speed: 200.0 MHz (PC3200) Module Manufacturer: A-DATA Technology Module Model: Serial Number: N/A Manufacturing Date: Unknown [Module Characteristics] Module Width: 64-bits Module Voltage: SSTL 2.5V SPD Revision: 1.0 Number Of Rows: 1 Row Address Bits: 13 Column Address Bits: 11 Number Of Banks: 4 [Module timing] Supported Burst Lengths: 2, 4, 8 Refresh Rate: Reduced 0.5x (7.8 us) Min. Back-to-Back Clock Delay: 1 Supported CAS Latencies (tCAS): 3.0, 2.5 Min. RAS-to-CAS Delay (tRCD): 20.00 ns Min. Row Precharge Time (tRP): 20.00 ns Min. RAS Pulse Width (tRAS): 40 ns Supported Module Timing at 200.0 MHz: 3.0-4-4-8 Supported Module Timing at 166.7 MHz: 2.5-4-4-7 Min. Row-Activate To Row-Activate Delay (tRRD): 10.00 ns Supported CS Latency: 0 Supported WE Latency: 1 [Features] Buffered Address/Control Inputs: Not Supported Registered Address/Control Inputs: Not Supported On-card PLL For Clock: Not Supported Buffered DQMB Inputs: Not Supported Registered DQMB Inputs: Not Supported Differential Clock Input: Supported Redundant Row Address: Not Supported Bus ----------------------------------------------------------------------- PCI Bus #0 ---------------------------------------------------------------- VIA VT8377 KT400A/KT600 Chipset - System Controller ----------------------- [General Information] Device Name: VIA VT8377 KT400A/KT600 Chipset - System Controller Original Device Name: VIA VT8377 KT400A/KT600 Chipset - System Controller Device Class: Host-to-PCI Bridge Revision ID: 80 Bus Number: 0 Device Number: 0 Function Number: 0 PCI Latency Timer: 8 Hardware ID: PCI\VEN_1106&DEV_3189&SUBSYS_31891849&REV_80 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A Memory Base Address 0 E0000000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Not Capable [V-Link Specification ID] Specification Revision: 0 [NB V-Link Capability] 16-bit Bus Width: Not Supported 8-bit Bus Width: Supported 4x Rate: Supported 2x Rate: Not Supported 8x Rate: Supported [NB Downlink Command] DnCmd Max Request Depth: 9 cmds DnCmd Write Buffer Size: 8 DWords [NB Uplink Status] UpCmd P2C Write Buffer Size: 8 lines UpCmd P2P Write Buffer Size: 2 lines UpCmd Max Request Depth: 9 cmds [NB V-Link Bus Timer] Timer for Normal Priority Requests from SB: 4*4 VCLKs Timer for High Priority Requests from SB: 4*4 VCLKs [NB V-Link Misc Control] Downstream High Priority: Disabled Downlink Priority: Normal Combine Multiple STPGNT Cycles into One VLink Command: 1:1 (compatible) V-Link Master Access Ordering Rules: High priority read, pass normal read Ready Queue Full Performance: Backwards Compatible [V-Link Control] Parity Error or SERR Reporting to NMI: Disabled Parity Error or SERR Reporting to SB via V-Link: Disabled L1 Ready Return: When C2P read acknowledgement is received Dynamic Stop of Down Strobe: Disabled Auto-Disconnect: Disabled V-Link Disconnect Cycle for HALT Cycle: Disabled V-Link Disconnect Cycle for STPGNT Cycle: Disabled [NB/SB V-Link Configuration] V-Link Parity Check: Disabled Reset Bus Width: Not Supported 16-bit Bus Width: Not Supported 8-bit Bus Width: Supported 4x Rate: Supported 2x Rate: Not Supported 8x Rate: Not Supported [SB V-Link Capability] 16-bit Bus Width: Not Supported 8-bit Bus Width: Supported 4x Rate: Supported 2x Rate: Not Supported 8x Rate: Supported [SB Downlink Status] DnCmd Max Request Depth: 9 cmds DnCmd Write Buffer Size: 8 DWords [SB Uplink Command] UpCmd P2C Write Buffer Size: 8 lines UpCmd P2P Write Buffer Size: 2 lines UpCmd Max Request Depth: 9 cmds [SB V-Link Bus Timer] Timer for Normal Priority Requests from NB: 4*4 VCLKs Timer for High Priority Requests from NB: 4*4 VCLKs [CCA Master Priority] 1394 Priority: Low LAN/NIC Priority: Low USB Priority: Low IDE Priority: Low AC97-ISA Priority: Low PCI Priority: Low [SB V-Link Misc Control] Upstream High Priority: Disabled Down Cycle Wait for Up Cycle Write Flush: Disabled [CPU Frequency Select] CPU FSB Frequency: 166 MHz ROMSIP Configuration: Disabled SDRAM Burst Length 8QW: Disabled Rx85, 86, and 87 Writable: Disabled PCI Master 8QW Operation: Disabled VPX Mode: Disabled (AGP Mode) [DRAM Control] 0WS Back-to-Back Write to Different DDR Bank: Enabled Fast Read-to-Read Turn-Around: Disabled DQS Input DLL Adjustment: Disabled DQS Output DLL Adjustment: Disabled DQM Removal (Always Perform 4-Burst RW): Disabled DQS Output: Enabled Auto Precharge for TLB Read or CPU WriteBack: Disabled Write Recovery Time: 3T [Shadow RAM Control 1] CC000h-CFFFFh: Read-only C8000h-CBFFFh: Read-only C4000h-C7FFFh: Read-only C0000h-C3FFFh: Read-only [Shadow RAM Control 2] DC000h-DFFFFh: No access D8000h-DBFFFh: No access D4000h-D7FFFh: No access D0000h-D3FFFh: No access [Shadow RAM Control 3] E0000h-EFFFFh: No access F0000h-FFFFFh: Read-only Memory Hole: None A,BK Direct SMRAM Access: Enabled A,BK DRAM Access: Disabled [DRAM Timing for All Banks] Precharge Command to Active Command Period: Trp = 2T Active Command to Precharge Command Period: Tras = 7T CAS Latency: 2.5T ACTIVE to CMD: 2T Bank Interleave: 4-way [DRAM Arbitration Timer] AGP Timer: 36 MCLKs CPU Timer: 36 MCLKs [DRAM Arbitration Control] DQS Input Delay: Auto DRAM Access: 3T Arbitration Parking Policy: Park at last bus owner AGP / CPU Priority: 0 MCLKs [Strobe Input Delay] DQS Input Delay: 21 [Strobe Output Delay] DQS Output Delay: 85 [DRAM Clock Select] DRAM Operating Frequency: Same As or 33 MHz Faster DRAM Operating Frequency Faster Than CPU: Same Frequency DRAM Queue More Than 2: Enabled DRAM Queue Not Equal to 4: Disabled DRAM 8K Page: Enabled DRAM 4K Page: Enabled DIMM Type: Unbuffered Multiple Page Mode: Enabled [Refresh Counter] Refresh Counter: 1344 MCLKs [DRAM Arbitration Control] Fast Read to Write turn-around: Enabled Page Kept Active When Cross Bank: Enabled Burst Refresh: Disabled CKE Function: Enabled Swap CA22 / CA14: Disabled [DRAM Drive Control] CS# / CKE Early Clock: Latest SCMD / MA Early Clock: Latest Driving Group - S Port Control: Disabled DDR400 Twtr Timing Control: 3 T [DRAM MD Output Delay] MD Output Delay: 75 [ECC Control] Error Checking Mode: EC SERR# on ECC Multi-Bit Error: Disabled SERR# on ECC Single-Bit Error: Disabled EC/ECC Enable [Bank 7/6]: Disabled EC/ECC Enable [Bank 5/4]: Disabled EC/ECC Enable [Bank 3/2]: Disabled EC/ECC Enable [Bank 1/0]: Disabled [PCI Buffer Control] CPU-to-PCI Posted Writes: Enabled PCI Master to DRAM Prefetch: Always prefetch PCI Master Read Buffering: Disabled Delay Transaction: Enabled [CPU to PCI Flow Control] Retry Timeout Action: Flush buffer Retry Count And Backoff: 2x, back off CPU PCI Burst: Enabled Configuration Cycle: Fix AD31 IDSEL Control: AD11/AD12 [PCI Master Control] PCI Master 1 WS Write: 0 WS TRDY# Resp. PCI Master 1 WS Read: 0 WS TRDY# Resp. WSC#: Disabled PCI Master Broken Timer: Enabled [PCI Arbitration Control 1] Arbitration Mode: REQ#-based CPU Latency: 0 PCI Master Bus Timeout: 288 PCICLKs [PCI Arbitration Control 2] I/O Port 22: Disabled Master Priority Rotation Control: After 1 PCI master grant REQn# to REQ4# Mapping: REQ4# REQ4# Master Priority: Normal [AGP 2.0 Graphics Aperture Size] Graphics Aperture Size: [CPU-to-Memory Write Policy] Write Request Limit: 0 Write Request Base: 10 [CPU-to-Memory Bandwidth Timer] Host Bandwidth Timer: 0 DRAM Bandwidth Timer: 0 [CPU-to-Memory Bandwidth Limit] Bandwidth Limit: Dynamically toggled CPU Access DRAM Read After Write: Improved [AGP 2.0 GART Base] GART Base Address: 0 Graphics Aperture Status: Enabled [AGP 2.0 Status] Max. AGP Request Queue Depth: 0 AGP Side Band Addressing: Not supported 4G Support: Not supported Fast Write: Not supported Supported AGP Data Transfer: [AGP 2.0 Command] AGP Sideband Addressing: Disabled AGP Status: Disabled 4G Support: Disabled Fast Write: Disabled Current AGP Transfer Rate: None [AGP 3.0 Status] Max. AGP Request Queue Depth: 31 Optimum Async Request Size: 0 Calibration Cycle Setting: 64 ms AGP Side Band Addressing: Supported 64-Bit GART Entries: Not supported CPU GART Translation: Not supported >4G Support: Not supported Fast Write: Not supported Signaling Mode: AGP 3.0 (0.8V) Supported AGP Data Transfer: 4x and 8x [AGP 3.0 Command] Max. AGP Request Queue Depth: 0 Calibration Cycle Setting: 4 ms AGP Sideband Addressing: Enabled AGP Status: Enabled >4G Support: Disabled Fast Write: Disabled Current AGP Transfer Rate: 2x (8x if AGP 3.0) [AGP 3.0 GART / TLB Control] Calibration Cycle: Disabled Graphics Aperture Base Register Read: Enabled GART TLB: Enabled [AGP 3.0 Graphics Aperture Size] Aperture Page Size: 0 Page Size Supported: 1 Graphics Aperture Size: 64M [AGP 3.0 GART Table Base] GART Base Address: 10000 [AGP Control] AGP Status: Disabled AGP Read Synchronization: Disabled AGP Read Snoop DRAM Post-Write Buffer: Enabled GREQ# Priority Becomes Higher When Arbiter is Parked at AGP Master: Disabled AGP Arbitration Parking: Disabled AGP to PCI Master or CPU to PCI Turnaround Cycle: 1T [AGP Latency Timer] AGP Performance Improvement: Enabled Pipe Mode Performance Improvement: Disabled AGP Data Input: Enabled is necessary AGP Performance Improvement: First ready chosen AGP Data Phase Latency Timer: 8 [AGP Miscellaneous Control] AGP Performance Improvement: Disabled DBI / PIPE Mux Function: From DBIH (0.95) CPU GART Read, AGP GART Write Coherency: Disabled [AGP 3.0 Control] CPU / PCI Master GART Access: Enabled AGP Calibration: Enabled Mix Coherent / Non-coherent Accesses: Disabled DBI Function: Enabled DBI Output for AGP Transactions: Enabled DBI Output for Frame Transactions Including Fast-Write: Disabled DBI Output from Frame Transactions: Disabled [AGP Pad Control] AGP 4x Strobe VREF Control: STB VREF <=> STB# AGP 4x Strobe & GD Pad Drive Strength: Controlled by strenght reg AGP Compensation Circuit N Control Output: 7 AGP Compensation Circuit P Control Output: 7 [AGP Drive Strength] AGP Output Buffer Low Drive Strength N Control: 0 AGP Output Buffer High Drive Strength P Control: 0 [AGP Pad Drive / Delay Control] GD/GBE/GDS, SBA/SBS Control: =0 GD / GBE Receive Strobe Delay: None GD[31-16] Staggered Delay: None AGP Slew Rate: Disabled SBA Receive Strobe Delay: None GDS Output Delay: 1.5 ns [AGP Strobe Drive Strength] AGP Strobe Output Low Drive Strength: 0 AGP Strobe Output High Drive Strength: 0 [V-Link NB Compensation Control] V-Link Autocompensation High Output Value: 3 V-Link Autocompensation Low Output Value: 4 Compensation Mode: Manual [V-Link NB Drive Control] Strobe High Drive Manual Setting: 2 Strobe Low Drive Manual Setting: 3 [V-Link NB Data Drive Control] Data High Drive Manual Setting: 2 Data Low Drive Manual Setting: 3 [V-Link SB Compensation Control] V-Link Autocompensation High Output Value: 3 V-Link Autocompensation Low Output Value: 4 Compensation Mode: Manual [V-Link SB Strobe Drive Control] Strobe High Drive Manual Setting: 1 Strobe Low Drive Manual Setting: 1 [V-Link SB Data Drive Control] Data High Drive Manual Setting: 5 Data Low Drive Manual Setting: 5 [Power Management Mode] Dynamic Power Management: Disabled Halt / Shutdown Enables Power Management: Disabled Stop Clock Enables Power Management: Disabled Suspend Status Enables Power Management: Disabled [DRAM Power Management Mode] DRAM Self-Refresh in Power Management Mode: Disabled Dynamic CKE When DRAM Is Idle: Disabled Dynamic DRAM I/O Pad Power-Down (Float): Enabled [Dynamic Clock Stop Control] Host CPU Interface Power Management: Disabled DRAM Interface Power Management: Disabled V-Link Interface Power Management: Disabled AGP Interface Power Management: Enabled PCI#2 Interface Power Management: Enabled Graphics Interface Power Management: Disabled Host CPU Fast Power Management (DADS Fast Timing): Enabled [DRAM Pad Toggle Reduction] MA / SCMD Pin Toggle Reduction: Enabled DIMM #3 MAA / MAB Select: MAA DIMM #2 MAA / MAB Select: MAA DIMM #1 MAA / MAB Select: MAB DIMM #0 MAA / MAB Select: MAA [S2K Timing Control III] Disconnect Enable When STPGNT Detected: Disabled Write to Read Delay: 1 Read to Write Delay: 2 Write Data Delay from SYSDC to CPU Data Output: 3 [BIU Arbitration Control] Max of Contiguous Probe SysDC Before Switch to Other Type of SysDC: 3 Max of Contiguous Read SysDC Before Switch to Other Type of SysDC: 5 Max of Contiguous Write SysDC Before Switch to Other Type of SysDC: 2 [BIU Control 1] SDRAM Self-Refresh When Disconnected: Disabled Probe Next Tag State T1 When PCI Master Read Cacheing Enabled: Disabled 64 HCLK Wait Time: Disabled Master Request Full Protocol: Enhanced DRAM Speculative Read for PCI Master Read: Disabled PCI Master Pipeline Request: Enabled PCI-to-CPU / CPU-to-PCI Concurrency: Enabled Fast Write-to-Read Turnaround: Enabled [BIU Control 2] FWDVLD / PSQHPTR Concurrency: Backwards Compatible RHOCTW: Off PMW Address Compare: Backward compatible Write Policy for CPU Write to DRAM: Disabled PMR Cycle Execution When MWQ Is Full: Execute FID Command Detect: Enabled HALT Command Detect: Disabled [BIU Control 3] Memory Write Queue Timer Function: Enabled Memory Write Queue Timer Function Trigger: Command FIFO utilization Memory Write Queue Timer High Bound: 6 Memory Write Queue Timer Low Bound: 1 [CPU Strapping Control] CPU Clock Division: 10.5x S2K Drive Strength: Strap Fast Address Out Decode: Normal S2K Compensation Circuit: Enabled on Disconnect [S2K Compensation Strapping] S2K Pullup Drive Strength: 7 S2K Pulldown Drive Strength: 4 [S2K Compensation Result 1] Pullup Autocompensation Result: 15 Pulldown Autocompensation Result: 15 [S2K Compensation Result 2] S2K Edge DQ Mode: Central DQ S2K Strobe Delay: 0 [S2K Compensation Result 3] S2K Strobe DLL Delay Counter: 0 [S2K Compensation Result 4] S2K Compensation Circuit Trigger: Off DLL Autodetect: On Delay Compensation Counter Control: On S2K Pad AC Coupling to VREF Signal in Address/Data Output Clock: 0 S2K Pad Slew Rate Control: 1 [S2K Compensation Result 5] S2K Strobe Output Drive Strength P Control: 7 S2K Strobe Output Drive Strength N Control: 4 [BIU Control 4] Pending Memory Read: Not pending Issue Memory Write Queue Ready When Command FIFO is Empty Enough (>24): Enabled Issue Memory Write Queue If More Than 4 CPU Requests Are Pending: Enabled Fast Write Performance Improvement: Enabled Issue Write DADS Only When Memory Write Queue Timer or DM Idle or HB Hit: Disabled Compare Partial Address to Decide if CPU-to-Memory Read Hit CPU-to-Memory Write: Compare HA[31:12] P2C Write Priority Over Read: Disabled DPH5 Performance Improvement: Enabled [BIU Control 5] Transparent MD to HD Synchronous Mode Performance Improvement: Disabled [APIC Decoding] I/O APIC Decoding: FECxxxxx->PCI [DQ Drive Control] High Drive - MD, MECC, DQS#, DQM: 9 Low Drive - MD, MECC, DQS#, DQM: 10 [CS Drive Control] High Drive - CS#, CKE: 7 Low Drive - CS#, CKE: 7 [MAA Drive Control] High Drive - MAA, SRASA, SCASA, SWEA: 9 Low Drive - MAA, SRASA, SCASA, SWEA: 10 [MAB Drive Control] High Drive - MAB, SRASB, SCASB, SWEB: 9 Low Drive - MAB, SRASB, SCASB, SWEB: 10 [DRAM S-Port Control] DQ S-Port Control: Off CS# S-Port Control: Off MAA S-Port Control: Off MAB S-Port Control: Off DQS S-Port Control: Off [DRAM DQS Drive Control] High Drive - DQS: 9 Low Drive - DQS: 10 [DRAM DQS/MD Duty Cycle] DQS / MD Output Rise Time: 0 DQS / MD Output Fall Time: 0 [AGP 2.0 / 3.0 Select] AGP Capability Pointer Value: AGP 3.0 Compatible Rx80-AF: AGP 3.0 AGP Status Register Write: Disabled VIA P4 A.G.P. Controller -------------------------------------------------- [General Information] Device Name: VIA P4 A.G.P. Controller Original Device Name: VIA P4 A.G.P. Controller Device Class: PCI-to-PCI Bridge Revision ID: 0 Bus Number: 0 Device Number: 1 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1106&DEV_B198&SUBSYS_00000000&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Not Capable [CPU-to-AGP Flow Control 1] CPU-AGP Post Write: Enabled CPU-AGP One Wait State Burst Write: Disabled Read Prefetch Control: Always prefetch MDA on AGP: Forward to AGP AGP Master Read Caching: Disabled AGP Delay Transaction: Enabled [CPU-to-AGP Flow Control 2] Retry Timeout Action: Flush buffer Retry Count And Backoff: 2x, back off CPU CPU-to-AGP Burst Timeout: Disabled CPU-to-PCI/AGP Cycles Invalidate PCI/AGP Buffered Read Data: Disabled [AGP Master Control] AGP Master One Wait State Write: Disabled AGP Master One Wait State Read: Disabled Break Consecutive PCI Master Accesses: Disabled Claim I/O R/W and Memory Read Cycles: Disabled Claim Local APIC FEEx xxxx Cycles: Disabled Snoop Write Enable 2T Rate, Support Host Side Snoop Cycles at 2T Rate: Disabled [AGP Master Latency Timer] Host to AGP Time slot: 64 GCLKs AGP Master Time slot: 64 GCLKs [Fast Write Control] Force Fast Write Cycle to be QW Aligned: Disabled Merge Multiple CPU Transactions Into One Fast Write Burst Transaction: Enabled Merge Multiple CPU Write Cycles To Memory Offset 23-20 Into Fast Write Burst Cycles: Enabled Merge Multiple CPU Write Cycles To Prefetchable Memory Offset 27-24 Into Fast Write Burst Cycles: Enabled Fast Write Burst 4T Max (No Slave Flow Control): Disabled Fast Write Fast Back to Back: Enabled Fast Write Initial Block 1 Wait State: Disabled AGP 8x Bus (PCI Bus #1) --------------------------------------------------- Tul Radeon 9250 ----------------------------------------------------------- [General Information] Device Name: Tul Radeon 9250 Original Device Name: ATI/AMD Radeon 9200 PRO (RV280) Device Class: VGA Compatible Adapter Revision ID: 1 Bus Number: 1 Device Number: 0 Function Number: 0 PCI Latency Timer: 255 Hardware ID: PCI\VEN_1002&DEV_5960&SUBSYS_2094148C&REV_01 [System Resources] Interrupt Line: IRQ16 Interrupt Pin: INTA# Memory Base Address 0 D0000000 I/O Base Address 1 C800 Memory Base Address 2 DFEF0000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable Tul Radeon 9250 - Secondary ----------------------------------------------- [General Information] Device Name: Tul Radeon 9250 - Secondary Original Device Name: ATI/AMD Radeon 9200 PRO (RV280) - Secondary Device Class: Unknown Video Adapter Revision ID: 1 Bus Number: 1 Device Number: 0 Function Number: 1 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1002&DEV_5940&SUBSYS_2095148C&REV_01 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A Memory Base Address 0 C8000000 Memory Base Address 1 DFEE0000 [Features] Bus Mastering: Enabled Running At 66 MHz: Capable Fast Back-to-Back Transactions: Capable VIA VT8235 USB Universal Host Controller ---------------------------------- [General Information] Device Name: VIA VT8235 USB Universal Host Controller Original Device Name: VIA VT8235 USB Universal Host Controller Device Class: Universal Serial Bus (USB) Revision ID: 80 Bus Number: 0 Device Number: 16 Function Number: 0 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_80 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTA# I/O Base Address 4 E400 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Miscellaneous Control 1] PCI Memory Commands Support: MRL, MRM, and MWAI Babbled Port of EOF: Disabled PCI Parity Checking: Disabled PERR# Frame Interval Select: 1 msec USB Data Length Limit: 1280 bytes USB Power Management/Improved FIFO Latency: Disabled DMA Limited To: 16-DW Burst PCI Wait States: 0 WS [Miscellaneous Control 2] USB 1.1 Improvement for EOP: Disabled (USB 1.0) Trap Status Bits Override: Disabled A20GATE Pass Through Option: Don't Pass [Miscellaneous Control 4] Continue Transmission of Erroneous Data on FIFO Underrun: Enabled Issue CRC Error Instead of Stuffing Error on FIFO Underrun: Enabled [Miscellaneous Control 5] Issue Bad CRC5 in SOF After FIFO Underrun: Enabled Lengthen PreSOF Time: Enabled Issue Nonzero Bad CRC Code on FIFO Underrun: Non zero CRC [Miscellaneous Control 6] EHCI Supports PME Assertion in D3 Cold State: Supported UHCI Supports PME Assertion in D3 Cold State: Supported [Miscellaneous Control 7] Use External 60 MHz Clock: Disabled [USB Release Number] USB Release Number: 1.0 [USB Legacy Support] UHCI v1.1 Compliant: 2000 VIA VT8235 USB Universal Host Controller ---------------------------------- [General Information] Device Name: VIA VT8235 USB Universal Host Controller Original Device Name: VIA VT8235 USB Universal Host Controller Device Class: Universal Serial Bus (USB) Revision ID: 80 Bus Number: 0 Device Number: 16 Function Number: 1 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_80 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTB# I/O Base Address 4 E800 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Miscellaneous Control 1] PCI Memory Commands Support: MRL, MRM, and MWAI Babbled Port of EOF: Disabled PCI Parity Checking: Disabled PERR# Frame Interval Select: 1 msec USB Data Length Limit: 1280 bytes USB Power Management/Improved FIFO Latency: Disabled DMA Limited To: 16-DW Burst PCI Wait States: 0 WS [Miscellaneous Control 2] USB 1.1 Improvement for EOP: Disabled (USB 1.0) Trap Status Bits Override: Disabled A20GATE Pass Through Option: Don't Pass [Miscellaneous Control 4] Continue Transmission of Erroneous Data on FIFO Underrun: Enabled Issue CRC Error Instead of Stuffing Error on FIFO Underrun: Enabled [Miscellaneous Control 5] Issue Bad CRC5 in SOF After FIFO Underrun: Enabled Lengthen PreSOF Time: Enabled Issue Nonzero Bad CRC Code on FIFO Underrun: Non zero CRC [Miscellaneous Control 6] EHCI Supports PME Assertion in D3 Cold State: Supported UHCI Supports PME Assertion in D3 Cold State: Supported [Miscellaneous Control 7] Use External 60 MHz Clock: Disabled [USB Release Number] USB Release Number: 1.0 [USB Legacy Support] UHCI v1.1 Compliant: 2000 VIA VT8235 USB Universal Host Controller ---------------------------------- [General Information] Device Name: VIA VT8235 USB Universal Host Controller Original Device Name: VIA VT8235 USB Universal Host Controller Device Class: Universal Serial Bus (USB) Revision ID: 80 Bus Number: 0 Device Number: 16 Function Number: 2 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_80 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTC# I/O Base Address 4 EC00 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Miscellaneous Control 1] PCI Memory Commands Support: MRL, MRM, and MWAI Babbled Port of EOF: Disabled PCI Parity Checking: Disabled PERR# Frame Interval Select: 1 msec USB Data Length Limit: 1280 bytes USB Power Management/Improved FIFO Latency: Disabled DMA Limited To: 16-DW Burst PCI Wait States: 0 WS [Miscellaneous Control 2] USB 1.1 Improvement for EOP: Disabled (USB 1.0) Trap Status Bits Override: Disabled A20GATE Pass Through Option: Don't Pass [Miscellaneous Control 4] Continue Transmission of Erroneous Data on FIFO Underrun: Enabled Issue CRC Error Instead of Stuffing Error on FIFO Underrun: Enabled [Miscellaneous Control 5] Issue Bad CRC5 in SOF After FIFO Underrun: Enabled Lengthen PreSOF Time: Enabled Issue Nonzero Bad CRC Code on FIFO Underrun: Non zero CRC [Miscellaneous Control 6] EHCI Supports PME Assertion in D3 Cold State: Supported UHCI Supports PME Assertion in D3 Cold State: Supported [Miscellaneous Control 7] Use External 60 MHz Clock: Disabled [USB Release Number] USB Release Number: 1.0 [USB Legacy Support] UHCI v1.1 Compliant: 2000 VIA VT8235 USB 2.0 Enhanced Host Controller ------------------------------- [General Information] Device Name: VIA VT8235 USB 2.0 Enhanced Host Controller Original Device Name: VIA VT8235 USB 2.0 Enhanced Host Controller Device Class: Universal Serial Bus (USB) Revision ID: 82 Bus Number: 0 Device Number: 16 Function Number: 3 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1106&DEV_3104&SUBSYS_31041849&REV_82 [System Resources] Interrupt Line: IRQ21 Interrupt Pin: INTD# Memory Base Address 0 DFFFFF00 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Miscellaneous Control 1] Babbled Port of EOF: Enabled PCI Parity Checking: Disabled PERR# DMA Limited To: 16-DW Burst [Miscellaneous Control 5] CCA Burst Access: Enabled [Miscellaneous Control 6] Clock Auto Stop: Disabled Auto Power Down Receiver Squelch Detector: Always Powered Up [USB Release Number] USB Release Number: 2.0 [Frame Length Adjust] Frame Length Adjust: 32 VIA VT8233A CF/VT8235 PCI-to-ISA Bridge ----------------------------------- [General Information] Device Name: VIA VT8233A CF/VT8235 PCI-to-ISA Bridge Original Device Name: VIA VT8233A CF/VT8235 PCI-to-ISA Bridge Device Class: PCI-to-ISA Bridge Revision ID: 0 Bus Number: 0 Device Number: 17 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1106&DEV_3177&SUBSYS_31771849&REV_00 [System Resources] Interrupt Line: N/A Interrupt Pin: N/A [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [ISA Bus Control] ISA Command Delay: Normal I/O Recovery Time: Enabled ROM Wait States: 1 WS ROM Write: Disabled Double DMA Clock: 4 MHz 4D0/4D1 Port Configuration: Enabled DMA/Interrupt/Timer Shadow Register Read: Disabled Double ISA Bus Clock: PCLK/4 = 8 MHz [BIOS ROM Decode Control] FFF00000h-FFF7FFFFh: Disabled FFE80000h-FFEFFFFFh: Disabled FFE00000h-FFE7FFFFh: Disabled FFD80000h-FFDFFFFFh: Disabled FFD00000h-FFD7FFFFh: Disabled FFC80000h-FFCFFFFFh: Disabled FFC00000h-FFC7FFFFh: Disabled [Line Buffer Control] ISA Master DMA Line Buffer: Disabled Gate Interrupt Until Line Buffer Flush Complete: Enabled Flush Line Buffer for Interrupt: Enabled Uninterruptable Burst Read: Enabled Gate IRQ Until Line Bufer Flush Completed: Enabled [Delay Transaction Control] Delayed Transactions (PCI 2.1): Disabled Only Posted Write: Disabled Write Delay Transaction Timeout Timer: Disabled Read Delay Transaction Timeout Timer: Disabled [Read Pass Write Control] APIC FSB Fixed at Low DW: Disabled AC97 / LPC Read Pass Write: Enabled IDE Read Pass Write: Enabled USB Read Pass Write: Disabled NIC Read Pass Write: Disabled [CCA Control] South Bridge Internal Master Devices Priority Higher Than External PCI Master: Disabled CCA Clean to Mask Off IRQ: Disabled WSC Mask Off INTR: Disabled [IDE Interrupt Routing] I/O Recovery Time: 2 BCLKs Secondary IDE Channel IRQ Routing: IRQ15 Primary IDE Channel IRQ Routing: IRQ14 [Function Control 1] MC'97 Controller: Disabled AC'97 Controller: Enabled USB 1.1 UHCI Ports 2-3: Enabled USB 1.1 UHCI Ports 0-1: Enabled IDE Controller: Enabled USB 1.1 UHCI Ports 4-5: Enabled USB 2.0 EHCI: Enabled Internal Audio: Enabled [Function Control 2] Internal LAN Controller Clock Gating: Disabled Internal LAN Controller: Enabled Internal RTC: Enabled Internal PS/2 Mouse: Enabled Internal KBC Configuration: Disabled Internal KBC: Enabled [Serial IRQ & LPC Control] LPC Short Wait Abort: Disabled LPC Frame Wait State Time: 1 T LPC Stop to Start Frame Wait State: Enabled Serial IRQ: Enabled Serial IRQ Mode: Continuous Serial IRQ Start-Frame Width: 6 PCICLKs [PC/PCI DMA Control] PCI DMA Pair A and B: Disabled PCI DMA Channel 7: Disabled PCI DMA Channel 6: Disabled PCI DMA Channel 5: Disabled PCI DMA Channel 3: Disabled PCI DMA Channel 2: Disabled PCI DMA Channel 1: Disabled PCI DMA Channel 0: Disabled [PCI Interrupt Polarity] PCI INTA#: Level-sensitive PCI INTB#: Level-sensitive PCI INTC#: Level-sensitive PCI INTD#: Level-sensitive [PCI PNP Interrupt Routing 1] PCI INTA# Routing: Disabled [PCI PNP Interrupt Routing 2] PCI INTC# Routing: Disabled PCI INTB# Routing: Disabled [PCI PNP Interrupt Routing 3] PCI INTD# Routing: Disabled [Miscellaneous Control 0] Internal APIC: Enabled South Bridge Interrupt Cycles Run at 33 MHz: Disabled Address Decode: Subtractive RTC High Bank Access: Disabled RTC Rx32 Write Protect: Disabled RTC Rx0D Write Protect: Enabled RTC Rx32 Map to Century Byte: Enabled [Miscellaneous Control 1] LPC RTC: Disabled LPC Keyboard: Disabled External MCCS to LPC: Disabled Internal MCCS: Disabled A20M# Active: Disabled NMI on PCI Parity Error: Disabled [DMA Bandwidth Control] DMA Channel 7 Bandwidth: Improved DMA Channel 6 Bandwidth: Improved DMA Channel 5 Bandwidth: Improved DMA Single Transfer Mode Bandwidth: Improved DMA Channel 3 Bandwidth: Improved DMA Channel 2 Bandwidth: Improved DMA Channel 1 Bandwidth: Improved DMA Channel 0 Bandwidth: Improved [Miscellaneous Control 2] Bypass APIC De-Assert Message: Disabled APIC LDT Mode: Disabled INTE#, INTF#, INTG#, INTH#: Disabled Dynamic Clock Stop: Enabled [PCS Control] PCS 0 I/O Port Address: 0 PCS 1 I/O Port Address: 804 PCS 2 I/O Port Address: 0 PCS 3 I/O Port Address: 0 [PCS I/O Port Address Mask] PCS 3 I/O Port Address Mask (Range): 1 Byte PCS 2 I/O Port Address Mask (Range): 1 Byte PCS 1 I/O Port Address Mask (Range): 2 Bytes PCS 0 I/O Port Address Mask (Range): 1 Byte [PCS Control] PCS 3 Internal I/O: Disabled PCS 2 Internal I/O: Disabled PCS 1 Internal I/O: Disabled PCS 0 Internal I/O: Disabled PCS 3: Disabled PCS 2: Disabled PCS 1: Enabled PCS 0: Disabled [Output Control] FERR Voltage: 1.5 V [ISA Positive Decoding Control 1] On-Board I/O Port Positive Decoding: Disabled MSS I/O Port Positive Decoding: Disabled MSS I/O Decode Range: 0530h-0537h Internal APIC Positive Decoding: Disabled BIOS ROM Positive Decoding: Disabled Internal PCS1# Positive Decoding: Disabled Internal PCS0# Positive Decoding: Disabled [ISA Positive Decoding Control 2] FDC Positive Decoding: Disabled LPT Positive Decoding: Disabled LPT Decode Range: 3BCh-3BFh, 7BCh-7BEh Game Port Positive Decoding: Disabled MIDI Positive Decoding: Disabled MIDI Decode Range: 300h-303h [ISA Positive Decoding Control 3] COM Port B Positive Decoding: Disabled COM Port B Decode Range: 3F8h-3FFh COM Port A Positive Decoding: Disabled COM Port A Decode Range: 3F8h-3FFh [ISA Positive Decoding Control 4] PCS2# and PCS3# Positive Decoding: Disabled I/O Port 0CF9h Positive Decoding: Disabled FDC Decoding Range: Primary Sound Blaster Positive Decoding: Disabled Sound Blaster Decode Range: 220h-233h [I/O Pad Control] IDE Interface Output Drive Strength: 1 PLL PCLK Input Delay Select: 0 PLL CLK66 Feedback Delay Select: 0 [General Configuration 0] Sleep Button: Disabled Debounce LID and PWRBTN# Inputs for 200us: Enabled Microsoft Sound Monitor in Audio Access: Disabled Game Port Monitor in Audio Access: Disabled Sound Blaster Monitor in Audio Access: Disabled MIDI Monitor in Audio Access: Disabled [General Configuration 1] I/O Enable for ACPI I/O Base: Enabled ACPI Timer Count Select: 24-bit RTC Enable Signal Gated with PSON (SUSC#) in Soft-Off Mode: Enabled Clock Throttling Clock Select (STPCLK#): 30 (480) usec [ACPI Interrupt Select] ATX / AT Power Indicator: ATX SUSC# State: 1 SUSC# AC-Power-On Default Value: 1 SCI Interrupt Assignment: IRQ9 [Primary Interrupt Channel] IRQ15 As Pri. Int. Channel: Disabled IRQ14 As Pri. Int. Channel: Disabled IRQ13 As Pri. Int. Channel: Disabled IRQ12 As Pri. Int. Channel: Enabled IRQ11 As Pri. Int. Channel: Disabled IRQ10 As Pri. Int. Channel: Disabled IRQ9 As Pri. Int. Channel: Disabled IRQ8 As Pri. Int. Channel: Disabled IRQ7 As Pri. Int. Channel: Enabled IRQ6 As Pri. Int. Channel: Disabled IRQ5 As Pri. Int. Channel: Disabled IRQ4 As Pri. Int. Channel: Enabled IRQ3 As Pri. Int. Channel: Enabled IRQ1 As Pri. Int. Channel: Enabled IRQ0 As Pri. Int. Channel: Disabled [Secondary Interrupt Channel] IRQ15 As Sec. Int. Channel: Disabled IRQ14 As Sec. Int. Channel: Disabled IRQ13 As Sec. Int. Channel: Disabled IRQ12 As Sec. Int. Channel: Disabled IRQ11 As Sec. Int. Channel: Disabled IRQ10 As Sec. Int. Channel: Disabled IRQ9 As Sec. Int. Channel: Disabled IRQ8 As Sec. Int. Channel: Disabled IRQ7 As Sec. Int. Channel: Disabled IRQ6 As Sec. Int. Channel: Disabled IRQ5 As Sec. Int. Channel: Disabled IRQ4 As Sec. Int. Channel: Disabled IRQ3 As Sec. Int. Channel: Disabled IRQ1 As Sec. Int. Channel: Disabled IRQ0 As Sec. Int. Channel: Disabled [Power Management I/O Base] PM I/O Register Base Address: 800 [Host Bus Power Management Control] Thermal Duty Cycle: THRM: Disabled Processor Break Event: Disabled [Throttle / Clock Stop Control] Throttle Timer: 4-Bit Fast Clock (7.5us) as Throttle Timer Tick: Enabled SMI Level Output (Low): Enabled Internal Clock Stop for PCI Idle: Disabled Internal Clock Stop During C3: Disabled Internal Clock Stop During Suspend: Disabled [GP Timer Control] Conserve Mode Timer Count Value: 1/16 sec System In Power-Conservation Mode: No Power-Conservation Mode: Disabled Secondary Event Timer Count Value: 2 ms Secondary Event: Not occured Secondary Event Timer: Disabled GP1 Timer Count: 17 GP0 Timer Count: 0 GP1 Timer: Not Started GP1 Timer Automatic Reload: Disabled GP1 Timer Base: Disabled GP0 Timer: Not Started GP0 Timer Automatic Reload: Disabled GP0 Timer Base: Disabled [Power Well Control] SMBus Clock Select: From RTC 32.768 kHz Internal PLL Reset During Suspend: Disabled SUSST1# / GPO3 Select: GPO3 GPO2 / SUSB# Select: SUSB# GPO1 / SUSA# Select: GPO1 GPO0 Output Select: Fixed Output Level [Miscellaneous Power Well Control] CPUSTP# to SUSST# Delay Select: 125 usec min. SUSST# Deasserted Before PWRGD for STD: Enabled Keyboard / Mouse Port Swap: Disabled SMB2 / GPO Select: SMBDT2 / SMBCK2 AOL 2 SMB Slave: Disabled SUSCLK / GPO4 Select: SUSCLK USB Wakeup for STR / STD / SoftOff: Enabled [Power On / Reset Control] CPU Frequency Strapping Value Output to NMI, INTR, IGNNE#, and A20M# during RESET#: D [GP2/GP3 Timer Control] GP3 Timer: Not Started GP3 Timer Automatic Reload: Disabled GP3 Timer Tick Select: 1/16 sec GP2 Timer: Not Started GP2 Timer Automatic Reload: Disabled GP2 Timer Tick Select: Disabled [GP2 Timer] GP2 Timer Current Count: 64 [GP3 Timer] GP3 Timer Current Count: 0 [SMBus I/O Base] SMBus I/O Base Address: 400 [SMBus Host Configuration] SMBus Interrupt Type: SMI SMBus Interrupt: Disabled SMBus Host Controller: Enabled [SMBus Slave Address for Port 1] SMBus Slave Address for Port 1: 0 R/W for Shadow Port 1: Disabled [SMBus Slave Address for Port 2] SMBus Slave Address for Port 2: 0 R/W for Shadow Port 2: Disabled [SMBus Revision ID] SMBus Revision ID: 0 [GPI Inversion Control] GPI27 Input: Non-inverted GPI26 Input: Non-inverted GPI25 Input: Non-inverted GPI24 Input: Non-inverted GPI19 Input: Non-inverted GPI18 Input: Non-inverted GPI17 Input: Non-inverted GPI16 Input: Non-inverted [GPI SCI/SMI Select] GPI27 Interrupt: SCI GPI26 Interrupt: SCI GPI25 Interrupt: SCI GPI24 Interrupt: SCI GPI19 Interrupt: SCI GPI18 Interrupt: SCI GPI17 Interrupt: SCI GPI16 Interrupt: SCI [GPO Pin Select] ACSDIN2,3 / GPIO20,21 Select: ACSDIN2 / ACSDIN3 SA[19:16] / GPO[19:16] Select: SA[19:16] GPIO[15:12] Direction: Input GPIO[11:8] Direction: Input GNT5#/GPO7, REQ5#/GPI7 Select: GNT5#, REQ5# PCISTP#/GPO6 Select: PCISTP# CPUSTP#/GPO5 Select: CPUSTP# [GPIO I/O Select 1] Voltage Regulator Change Timer Select: 100 usec AGPBZ# Source of Bus Master Status: Disabled VGATE on GPIO8: GPIO8 CPU Frequency Change: Disabled PCS1# on ACSDIN3: PCS1# PCS0# on ACSDIN2: PCS0# IORDY/GPI19 Select: GPI19 [GPIO I/O Select 2] GPI31/GPO31 (GPIOE) Select: GPO31/GPIOE GPI30/GPO30 (GPIOD) Select: GPO30/GPIOD GPI25/GPO25 (GPIOC) Select: GPI25 GPI24/GPO24 (GPIOA) Select: GPI24 [GPO Output Type] GPO31 Output Type: OD GPO30 Output Type: OD GPO25 Output Type: OD GPO24 Output Type: OD VIA VT82C571 Integrated IDE Controller ------------------------------------ [General Information] Device Name: VIA VT82C571 Integrated IDE Controller Original Device Name: VIA VT82C571 Integrated IDE Controller Device Class: IDE Controller Revision ID: 6 Bus Number: 0 Device Number: 17 Function Number: 1 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1106&DEV_0571&SUBSYS_05711849&REV_06 [System Resources] Interrupt Line: N/A Interrupt Pin: INTA# I/O Base Address 4 FC00 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Capable [Chip Enable] Primary IDE Channel: Enabled Secondary IDE Channel: Enabled [IDE Configuration I] Primary IDE Read Prefetch Buffer: Enabled Primary IDE Post Write Buffer: Enabled Secondary IDE Read Prefetch Buffer: Enabled Secondary IDE Post Write Buffer: Enabled [IDE Configuration II] PIO Operating Mode - Primary Channel: Compatibility Mode PIO Operating Mode - Secondary Channel: Compatibility Mode [FIFO Configuration] FIFO Configuration: PRI = 16, SEC = 0 Primary Channel FIFO Threshold: 1/2 Secondary Channel FIFO Threshold: 1/2 [Miscellaneous Control 1] Master Read Cycle IRDY# Wait State: 0 WS Master Write Cycle IRDY# Wait State: 0 WS FIFO Output Data 1/2 Clock Advance/PIO Read Pre-Fetch Byte Counter: Enabled Bus-Master IDE Status Register Read Retry: Enabled Packet Command Prefetching: Disabled UltraDMA Host Must Wait for First Transfer Before Termination: Enabled [Miscellaneous Control 2] Interrupt Steering Swap Between Channels: Disabled Rx3C Write Protect: Enabled Memory-Read-Multiple Command: Enabled Memory-Write-and-Invalidate Command: Enabled [Miscellaneous Control 3] Read DMA FIFO Flush (PRI): Enabled Read DMA FIFO Flush (SEC): Enabled End-of-Sector FIFO Flush (PRI): Disabled End-of-Sector FIFO Flush (SEC): Disabled Maximum DRDY# Pulse Width: Unlimited [Drive Timing Control] Primary Drive 0 Active Pulse Width: 3 clocks Primary Drive 0 Recovery Time: 1 PCICLKs Primary Drive 1 Active Pulse Width: 2 PCICLKs Primary Drive 1 Recovery Time: 2 clocks Secondary Drive 0 Active Pulse Width: 3 clocks Secondary Drive 0 Recovery Time: 1 PCICLKs Secondary Drive 1 Active Pulse Width: 3 PCICLKs Secondary Drive 1 Recovery Time: 1 clocks [Address Setup Time] Primary Drive 0 Address Setup Time: 4T Primary Drive 1 Address Setup Time: 4T Secondary Drive 0 Address Setup Time: 4T Secondary Drive 1 Address Setup Time: 4T [Secondary Non-01F0h Port Access Timing] DIOR#/DIOW# Active Pulse Width: 12 PCICLKs DIOR#/DIOW# Recovery Time: 7 PCICLKs [Primary Non-01F0h Port Access Timing] DIOR#/DIOW# Active Pulse Width: 12 PCICLKs DIOR#/DIOW# Recovery Time: 7 PCICLKs [Ultra-DMA Extended Timing Control (SEC DRV 1)] Ultra-DMA Mode Enable Method: Using this reg. Ultra-DMA Mode: Enabled Transfer Mode: Ultra-DMA Cable Type Reporting: 40-pin Drive Cycle Time: 8T [Ultra-DMA Extended Timing Control (SEC DRV 0)] Ultra-DMA Mode Enable Method: Using Set Feature Cmd. Ultra-DMA Mode: Disabled Transfer Mode: DMA or PIO Cable Type Reporting: 40-pin Drive Cycle Time: 9T [Ultra-DMA Extended Timing Control (PRI DRV 1)] Ultra-DMA Mode Enable Method: Using Set Feature Cmd. Ultra-DMA Mode: Disabled Transfer Mode: DMA or PIO Cable Type Reporting: 80-pin Drive Cycle Time: 9T [Ultra-DMA Extended Timing Control (PRI DRV 0)] Ultra-DMA Mode Enable Method: Using this reg. Ultra-DMA Mode: Enabled Transfer Mode: Ultra-DMA Cable Type Reporting: 80-pin Drive Cycle Time: 3T [Ultra-DMA FIFO Control] Lower ISA Request Priority When Write Device Packet Command is Issued: Disabled Clear Native Mode Interrupt on Falling Edge of Gated Interrupt: Disabled Improve PIO Prefetch and Post-Write Performance: Enabled Memory Prefetch Size: 2 lines Change Drive Clears All FIFO & Internal States: Enabled Complete DMA Cycle with Transfer Size Less Than FIFO Size: Enabled [IDE Clock Gating] Dynamic 100/133 MHz Clock Gating: Enabled Dynamic 66 MHz Clock Gating: Enabled [Primary Sector Size] Sector Size: 512 Bytes/Sector [Secondary Sector Size] Sector Size: 512 Bytes/Sector VIA AC'97 Enhanced Audio Controller --------------------------------------- [General Information] Device Name: VIA AC'97 Enhanced Audio Controller Original Device Name: VIA AC'97 Enhanced Audio Controller Device Class: Multimedia Audio Adapter Revision ID: 50 Bus Number: 0 Device Number: 17 Function Number: 5 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_97611849&REV_50 [System Resources] Interrupt Line: IRQ22 Interrupt Pin: INTC# I/O Base Address 0 E000 [Features] Bus Mastering: Disabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable VIA VT6102 Rhine II Fast Ethernet Adapter --------------------------------- [General Information] Device Name: VIA VT6102 Rhine II Fast Ethernet Adapter Original Device Name: VIA VT6102 Rhine II Fast Ethernet Adapter Device Class: Ethernet Adapter Revision ID: 74 Bus Number: 0 Device Number: 18 Function Number: 0 PCI Latency Timer: 32 Hardware ID: PCI\VEN_1106&DEV_3065&SUBSYS_30651849&REV_74 [System Resources] Interrupt Line: IRQ23 Interrupt Pin: INTA# I/O Base Address 0 DC00 Memory Base Address 1 DFFFFE00 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable Video Adapter ------------------------------------------------------------- ATI Radeon 9250 (RV280LX) ------------------------------------------------- [Video chipset] Video Chipset: ATI Radeon 9250 (RV280LX) Video Memory: 128 MBytes of DDR SDRAM [Video Card] Video Card: Tul Radeon 9250 Video Bus: AGP 8X Video RAMDAC: Internal DAC(400MHz) Video BIOS Version: 008.017D.016.000 Video Chipset Revision: 0 [Performance] Processor Clock: 238.5 MHz Memory Clock: 200.3 MHz (Effective 400.5 MHz) Memory Bus Width: 64-bit Hardware ID: PCI\VEN_1002&DEV_5960&SUBSYS_2094148C&REV_01 Monitor ------------------------------------------------------------------- Proview Technology 17-inch 777/777N Pure Flat ----------------------------- [General information] Monitor Name: Proview Technology 17-inch 777/777N Pure Flat Monitor Name (Manuf): 180B Serial Number: FBUC4A0239282 Date Of Manufacture: Week: 43, Year: 2004 Monitor Hardware ID: Monitor\PTS0309 Max. Vertical Size: 24 cm Max. Horizontal Size: 32 cm Horizontal Frequency: 30 - 70 kHz Vertical Frequency: 50 - 160 Hz Maximum Pixel Clock: 110 MHz [Advanced parameters] Input Signal: Analog: 0.700 V / 0.300 V (1.000 V p-p) Display Type: RGB color Gamma Factor: 2.98 [DPMS Modes] Standby: Supported Suspend: Supported Active Off: Supported Standard Colour Space: Not Supported Preferred Timing Mode: Supported Default GTF Supported: Not Supported [DPMS Input Signal] Serration VSync: Not Supported Sync On Green: Not Supported Composite Sync: Not Supported Separate Syncs: Supported Blank-to-black Setup: Not Supported [Supported Video Modes] 640 x 480 85 Hz 800 x 600 85 Hz 800 x 600 100 Hz 1024 x 768 85 Hz 1280 x 1024 60 Hz 1024 x 768 320 x 240 mm, Pixel Clock 94.50 MHz Drives -------------------------------------------------------------------- Floppy Drives ------------------------------------------------------------- 1.44 MB 3˝" --------------------------------------------------------------- (S)ATA/ATAPI Drives ------------------------------------------------------- WDC WD800BB-00HEA0 -------------------------------------------------------- [General Information] Drive Controller: E-IDE (ATA-6) Drive Channel: Primary, Master Drive Model: WDC WD800BB-00HEA0 Drive Revision: 13.03G13 Drive Serial Number: WD-WMAJ51838991 Drive Capacity: 76,319 MBytes (80 GB) Drive Capacity [MB]: 76319 [Drive Geometry] Number of Cylinders: 16383 Number of Heads: 16 Sectors Per Track: 63 Bytes Per Sector: Unknown Bytes Per Track: Unknown Number Of ECC Bytes: 58 Number of Sectors: 16514064 Total 32-bit LBA Sectors: 156301488 Cache Buffer Size: 2048 KBytes Controller Type: Not Specified [Transfer Modes] Sectors Per Interrupt: Total: 16, Active: 16 Max. PIO Transfer Mode: 4 Multiword DMA Mode: Total: 2, Active: - Singleword DMA Mode: Total: -, Active: - Ultra-DMA Mode: Total: 5 (ATA-100), Active: 5 (ATA-100) Max. Multiword DMA Transfer Rate: 16.7 MBytes/s Max. PIO with IORDY Transfer Rate: 16.7 MBytes/s Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s Transfer Width: 16-bit Native Command Queuing: Not Supported TRIM Command: Not Supported [Device flags] Fixed Drive: Present Removable Drive: Not Present Magnetic Storage: Present LBA Mode: Supported DMA Mode: Supported IORDY: Supported IORDY Disableable: Supported [Features] Write Cache: Present, Active S.M.A.R.T. Feature: Present, Inactive Security Feature: Present, Inactive Removable Media Feature: Not Present, Disabled Power Management: Present, Active Advanced Power Management: Not Present, Inactive Packet Interface: Not Present, Disabled Look-Ahead Buffer: Present, Active Host Protected Area: Present, Enabled Power-Up In Standby: Not Suppported, Inactive Automatic Acoustic Management: Supported, Inactive 48-bit LBA: Not Suppported, Inactive [Self-Monitoring, Analysis and Reporting Technology] Raw Read Error Rate: 200/51, Worst: 200 Spin Up Time: 102/21, Worst: 97 (Data = 2266) Start/Stop Count: 96/40, Worst: 96 (Data = 4119) Reallocated Sector Count: 200/140, Worst: 200 Seek Error Rate: 200/51, Worst: 200 Power-On Hours/Cycle Count: 60/Always OK, Worst: 60 (Data = 29788) Spin Retry Count: 100/51, Worst: 100 Calibration Retry Count: 100/51, Worst: 100 Power Cycle Count: 97/Always OK, Worst: 97 (Data = 3999) Temperature 97/Always OK, Worst: 12 (Data = 46.0 °C) Reallocation Event Count: 200/Always OK, Worst: 200 Current Pending Sector Count: 200/Always OK, Worst: 200 (Data = 1) Off-Line Uncorrectable Sector Count: 200/Always OK, Worst: 200 (Data = 1) UltraDMA/SATA CRC Error Rate: 200/Always OK, Worst: 200 (Data = 13) Write Error Rate: 200/51, Worst: 200 LG CD-ROM CRD-8522B ------------------------------------------------------- [General information] Drive Model: LG CD-ROM CRD-8522B Drive Revision: 1.01 Device Type: CD-ROM [Device capabilities] Drive can read: CD-R HL-DT-ST DVDRAM GSA-H42N -------------------------------------------------- [General information] Drive Model: HL-DT-ST DVDRAM GSA-H42N Drive Revision: RL01 Device Type: CD-ROM drive SCSI Devices -------------------------------------------------------------- AXV CD/DVD-ROM ------------------------------------------------------------ [Device address] SCSI Port Number: 0 SCSI Bus Number: 0 SCSI Target ID: 0 SCSI Logical Unit Number: 0 [General information] Device Description: AXV CD/DVD-ROM Device Revision: 2.2a Device Type: DVD-ROM SCSI Version: SCSI-2 [Device flags] Removable Device: Capable Tagged Command Queuing: Not Supported Linked Commands: Not Supported Synchronous Data Transfer: Supported Relative Addressing: Not Supported Asynchronous Event Notification: Not Supported [Device capabilities] Drive can read: CD-R, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM Audio --------------------------------------------------------------------- VIA AC'97 Enhanced Audio Controller --------------------------------------- Audio Adapter: VIA AC'97 Enhanced Audio Controller Audio Controller Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_97611849&REV_50 AC'97 Codec: C-Media CMI9739A/9761 AC'97 Codec ID: 434D4983 [AC'97 Capabilities] Variable Rate Audio: Not Supported Double Rate Audio: Supported SPDIF Output: Not Supported Variable Rate Microphone ADC: Not Supported Center DAC: Supported Surround DACs: Supported LFE DAC: Supported Dedicated Microphone PCM Channel: Not Supported Modem Functions: Not Supported Bass and Treble Control: Not Supported Simulated Stereo: Not Supported Headphone Output: Not Supported Bass boost: Not Supported Network ------------------------------------------------------------------- VIA VT6102 Rhine II Fast Ethernet Adapter --------------------------------- [General information] Network Card: VIA VT6102 Rhine II Fast Ethernet Adapter Vendor Description: VIA Rhine II Fast Ethernet Adapter MAC Address: 00-0B-6A-79-90-21 [Capabilities] Maximum Link Speed: 10 Mbps Transmit Buffer Size: 49152 Bytes Receive Buffer Size: 196608 Bytes Hardware ID: PCI\VEN_1106&DEV_3065&SUBSYS_30651849&REV_74 Ports --------------------------------------------------------------------- Serial Ports -------------------------------------------------------------- COM1 ---------------------------------------------------------------------- Parallel Ports ------------------------------------------------------------ LPT1 ---------------------------------------------------------------------- USB ----------------------------------------------------------------------- Uniwersalny kontroler hosta USB VIA Rev 5 lub nowszy ---------------------- USB Hub ------------------------------------------------------------------- [Port1] : ADI USB Remote NDIS Network Device ------------------------------ Device Manufacturer: Linux 2.6.15/vox160-udc Product Name: RNDIS/Ethernet Gadget Serial Number: N/A USB Version Supported: 1.10 Driver Description: ADI USB Remote NDIS Network Device Hardware ID: USB\VID_1110&PID_6489 [Port2] : No Device Connected --------------------------------------------- Uniwersalny kontroler hosta USB VIA Rev 5 lub nowszy ---------------------- USB Hub ------------------------------------------------------------------- [Port1] : No Device Connected --------------------------------------------- [Port2] : No Device Connected --------------------------------------------- Uniwersalny kontroler hosta USB VIA Rev 5 lub nowszy ---------------------- USB Hub ------------------------------------------------------------------- [Port1] : No Device Connected --------------------------------------------- [Port2] : No Device Connected --------------------------------------------- Rozszerzony kontroler hosta do USB VIA ------------------------------------ USB Hub ------------------------------------------------------------------- [Port1] : No Device Connected --------------------------------------------- [Port2] : No Device Connected --------------------------------------------- [Port3] : No Device Connected --------------------------------------------- [Port4] : No Device Connected --------------------------------------------- [Port5] : No Device Connected --------------------------------------------- [Port6] : No Device Connected ---------------------------------------------