smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7(64)-sp1] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..65GSX Device Model: TOSHIBA MK5065GSXN Serial Number: 81PAC3XGT LU WWN Device Id: 5 000039 37378969e Firmware Version: GH101M User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu May 11 13:41:24 2017 GMTDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 188) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1933 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 8405 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 987 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 10734 10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8399 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 430 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 260 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 19879 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 38 (Min/Max 6/51) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 458 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8240 222 Loaded_Hours 0x0032 078 078 000 Old_age Always - 8901 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 309 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 1816 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1816 occurred at disk power-on lifetime: 7134 hours (297 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 4a d8 9e f8 6e Error: WP at LBA = 0x0ef89ed8 = 251174616 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 41 68 e0 d6 4c 40 00 00:33:15.506 WRITE FPDMA QUEUED 61 20 60 80 7f 38 40 00 00:33:15.505 WRITE FPDMA QUEUED 61 40 58 20 61 42 40 00 00:33:15.505 WRITE FPDMA QUEUED 60 40 50 e0 d6 4c 40 00 00:33:15.481 READ FPDMA QUEUED 61 b0 38 80 d9 4c 40 00 00:33:15.481 WRITE FPDMA QUEUED Error 1815 occurred at disk power-on lifetime: 7134 hours (297 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 aa d8 9e f8 6e Error: UNC at LBA = 0x0ef89ed8 = 251174616 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 20 b8 40 b2 05 40 00 00:33:11.249 READ FPDMA QUEUED 61 08 b0 70 6d 68 40 00 00:33:11.249 WRITE FPDMA QUEUED 61 10 98 f8 57 75 40 00 00:33:11.249 WRITE FPDMA QUEUED 61 20 80 80 7f 38 40 00 00:33:11.248 WRITE FPDMA QUEUED 61 40 78 20 60 42 40 00 00:33:11.248 WRITE FPDMA QUEUED Error 1814 occurred at disk power-on lifetime: 7134 hours (297 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 72 d8 9e f8 6e Error: UNC at LBA = 0x0ef89ed8 = 251174616 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 20 20 c0 cd 3f 40 00 00:33:06.757 READ FPDMA QUEUED 61 00 10 48 cc 3f 40 00 00:33:06.757 WRITE FPDMA QUEUED 61 08 08 70 6d 68 40 00 00:33:06.756 WRITE FPDMA QUEUED 61 08 00 60 b0 0c 40 00 00:33:06.755 WRITE FPDMA QUEUED 61 08 f8 78 6d 68 40 00 00:33:06.755 WRITE FPDMA QUEUED Error 1813 occurred at disk power-on lifetime: 7134 hours (297 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 fa d8 9e f8 6e Error: UNC at LBA = 0x0ef89ed8 = 251174616 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 20 20 98 ef 5e 40 00 00:33:02.233 READ FPDMA QUEUED 60 80 18 38 63 3e 40 00 00:33:02.222 READ FPDMA QUEUED 60 60 10 38 64 3e 40 00 00:33:02.221 READ FPDMA QUEUED 61 00 08 20 90 b8 40 00 00:33:02.206 WRITE FPDMA QUEUED 61 00 00 20 8f b8 40 00 00:33:02.206 WRITE FPDMA QUEUED Error 1812 occurred at disk power-on lifetime: 7134 hours (297 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 82 d8 9e f8 6e Error: WP at LBA = 0x0ef89ed8 = 251174616 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 58 10 d8 c3 84 40 00 00:32:58.033 WRITE FPDMA QUEUED 61 20 08 80 7f 38 40 00 00:32:58.033 WRITE FPDMA QUEUED 61 60 00 c0 56 42 40 00 00:32:58.032 WRITE FPDMA QUEUED 61 98 f8 88 88 b8 40 00 00:32:58.025 WRITE FPDMA QUEUED 61 00 f0 88 87 b8 40 00 00:32:58.024 WRITE FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.